vertical gas hot water boiler prices

Recently, customers found us, consulted gas boiler safety operating procedures and precautions, in response to your question, our technicians have given the answer. Safety operation rules and matters needing attention for gas-fired boilers. (1) when abnormal phenomenon is found in gas boiler body, how to do control device failure in safety accident should press emergency turn-off button to stop boiler operation; (2) when the boiler feed pump is damaged and the regulating device fails, it is necessary to press the emergency turn-off button to stop the operation of the boiler, (3) when there is a problem with the electric fuel, it is necessary to press the emergency turn-off button; 4 when there is a danger to boiler or personal safety phenomenon, emergency shutdown should be taken; 5. The start-stop of the burner is directed by the boiler controller according to the change of pressure. (this function is automatic) the operator should always observe the change of pressure and stop immediately if there is any abnormal phenomenon. 6. The boiler operator should observe the water level at any time during operation, especially to ensure that the replenishment tank is full of water. Operators should regularly discharge the boiler to ensure boiler water quality. 7. Once an abnormal phenomenon occurs during boiler operation, the operator should shut down immediately and start from the new engine after handling the fault. 8. The incendiary engine operator with three-phase power supply should determine the positive and reverse of the motor before the first start-up, otherwise it will not be able to do so. Normal ignition. (at this time the incendiary machine in ten seconds after the fan stop, control box alarm).

Heilongjiang provincial government to respond positively to win the Battle of Blue Sky policy action plan issued by the Ministry of ecology and environmental protection, recently issued "on the issuance of Heilongjiang Province to win the Battle of the sky three-year action plan" (hereinafter referred to as "Plan").

"Plan" requirements, as of 2020, the province of sulfur dioxide, nitrogen oxide emissions are decreased year on year in 2015 to more than 11%; PM2.5 did not meet the concentration level and above cities fell year on year in 2015 to more than 15% , and above the level of urban air quality days ratio reaches 88%, and more heavily polluted year 2015 the number of days decreased the ratio of 15% or more.

"Plan" put forward 47 specific measures from nine aspects, namely: to adjust and optimize the industrial structure, promote the formation of green development; speed up the adjustment of energy structure, build clean energy systems; actively adjust the transport structure, the development of green transportation system; optimal adjustment of land structure, promote urban and rural non-point source pollution control; strengthening regional joint prevention and control, to effectively deal with heavy pollution weather; sound regulations and standards, improve environmental economic policies; for strengthening the infrastructure, strict environmental enforcement inspectors; clear responsibility for implementation of the parties, strict accountability assessment ; strengthen information disclosure, mobilize the whole society to participate.

"Plan" requirements, strictly control the total coal consumption.

1, in accordance with the focus on the use of coal and clean use of principles, focusing on reduction of non-coal for electricity, coal and oil to promote alternative energy by 2020, cities (prefectures) Coal accounts for the proportion of energy consumption fell by 1.5% compared with 2015.

2, bulk coal strengthening control, adjustment and optimization of high-pollution fuel combustion zone ban, the use of high-pollution fuel control, bulk coal alternative strengthening. Clean steadily heating, promoting the use of clean coal and clean energy.

3, to carry out comprehensive improvement of coal-fired boilers, to carry out level and above urban area 10 steam tons / hour coal-fired boilers and "clear" action. Improve energy efficiency, we continue to implement the dual-control operations total energy consumption and intensity.

4, accelerate the development of clean energy, and orderly development of wind power, biomass power generation and actively promote the construction of hydropower development focus on the promotion of river basins, and strengthen the development and utilization of geothermal energy exploration, increase renewable energy consumptive efforts.

Oil-fired boilers include oil-fired water boilers, oil-fired vertical hot water boiler pricess, oil-fired heating boilers, oil-fired bath boilers, oil-fired steam boilers and so on. Oil-fired boilers are boilers fueled by light oil (such as diesel oil, kerosene), heavy oil, residual oil or crude oil. Compared with gas-fired boiler and gas-fired boiler, oil-fired boiler runs more economically than electric heating boiler and is more convenient to use than gas-fired boiler. With the development of economy and social progress as well as the improvement of people's awareness of environmental protection, coal-fired boilers are gradually out of sight because of serious pollution. Instead, they are replaced by new types of environmental protection digital boilers, such as electric heating boilers and oil-fired boilers. Gas-fired boiler, etc., plus electricity Hot boiler is the most expensive, gas-fired boiler needs to be opened with gas pipeline, then, if there is no natural gas pipeline, and hope that the operation cost of the boiler is low, only the choice of fuel-fired boiler. Oil-fired boiler is heated by burners, fuel atomization effect is good, fuel combustion is full, chimney can not see black smoke, so fuel-fired boiler green environmental protection, efficient and energy-saving.

Nine vertical hot water boiler prices technical characteristics of electric water boiler 1, the hot water boiler electric water boiler hot water boiler microcomputer controller, the built-in backlight in the LCD screen display, operating status of the boiler clearly visible. All operations are easily accomplished by simply buttons, super boiler display controller, the control function is complete. 2, a ceramic tubular electric heating hot water boiler uses water and electricity separation electrical heating mode, the complete separation of the tubes and electric heating boiler water, boiler safe and convenient maintenance, replacement of a heating tube; stainless steel tube electric heating type hot water boiler implementation immersion electrical heating, water heating furnace, high efficiency, and the heating furnace tube flange connection, easy to clean, replace them. 3, the user can arbitrarily set the temperature between 30 ℃ -90 ℃, the boiler in accordance with user requirements timing, temperature, or automatic circulation heating system to provide users with a bath heating, domestic hot water. 4, high-power stepping boiler heating control law input sharing group, the group can be randomly put into or heating is stopped according to the load variation, and significantly reduce the impact on power. You can also manually start and stop the heating section number, user side to adjust the power boiler itself. 5, the control system controls the circulation pump start and stop in accordance with the temperature of boiler water. Hot water circulating pump is stopped when the furnace temperature reaches an upper limit, below the hot water circulation pump start lower limit temperature. 6, bath, living with the embalmed internal hot water boiler, furnace rust corrosion, long service life of the boiler, hot water, clean water, sanitation. High centrifugation using glass fiber cotton multilayer insulation, heat loss, energy saving; famous white color board packaged, elegant appearance corrosion resistance. 7, the boiler having a leakage protection function (power supply control system detects electrical leakage, automatically cut off the power boiler), anti-dry protection low water level (the water level is below the minimum limit of the level set immediately stop and alarm), the furnace overheating protection function (start when the boiler shell temperature exceeds 105 deg.] C, immediately shut down and an alarm, the temperature of the normal automatic boiler), the temperature sensor protection function (control system keeps detecting sensor condition, stop immediately and alarm), the power supply voltage protection function (when the power supply is abnormal, the automatic power-off. after the normal, automatic recovery operation), the heating assembly phase protection function (monitoring phase after heating assembly, shutdown protection). 8, the top of this boiler has a vent to the atmosphere, the interior is not under pressure, boiler work at atmospheric pressure, there is no risk of explosion, the complete elimination of security risks. 9, a back outlet symmetrical design (double inlet) for quick connection installation; boiler mechanical and electrical integration, compact size and reasonable transportation is very convenient. When natural gas steam boiler for emergency shutdown? Emergency shutdown is an emergency action to take when natural gas steam boiler accident, in order to prevent the accident from being taken. When the boiler in operation, any of the following circumstances, should immediately shutdown: ① boiler water level below the lower edge of the visible water table, increasing water supply and other measures, but the water level continued to decline; ② boiler water level exceeds the maximum visible water level (full of water), the water drainage can not be seen; ③ all fail to pump failure or water supply system, not water to the boiler; ④ water gauge or all of valve failure; ⑤ boiler element damaged, thereby endangering the safety of operating personnel; ⑥ other unusual circumstances endanger the safe operation of the boiler. In case of power, water supply and other emergency situations should take timely measures. If not solved, it should be promptly reported to the company. Prohibited under pressure boiler water temperature or higher, the repair of boiler pressure element, to prevent the steam, the water discharge was wounded. Under repair equipment, to hang warning signs. Electrical equipment repair, electrical work should be carried out staff. If in vapor, flange and pipe joints, safety, staffing holes and inspection visits to check the hole, etc., should not be in front, but should side. The operation should wear protective gloves to prevent burns. The operator should make regular automatic (at least once every three months) and manual exhaust (at least once a week) to check and ensure that sensitive and reliable safety valve.