Jinzhou construction and installation company needs an electric heating hot water seller 4t fired boiler industrial philippines house construction, after screening and comparison of various brand boiler industry, our excellent results in the cleaning of the boiler industry has been attracted to each other, in mid-2016, the Jinzhou construction and installation the company I signed with an electric heating pressure hot water boiler.

8 large gas seller 4t fired boiler industrial philippines Safety Precautions: country increasingly stringent air pollution emission standards, an avalanche of environmental policy, the country has already started action boiler "from coal to gas," the elimination of polluting coal-fired boilers to switch to clean green gas boiler. Here, the fast boiler warm to remind you: must pay attention to the eight large gas boiler safe handling. 1, the burner start-up, if the burner repeat alarm lock, you need to immediately identify the reasons for the failure to identify and eliminate then press the reset button, continue to boot.

3. Adopt flue gas return body coil design, this DC-type structure, show the traditional seller 4t fired boiler industrial philippines does not have security.

4. As a result of coil-type structure and therefore, sufficient heating surface so that it will have a higher thermal efficiency.

5. Heat-conductive of boiler, characterized by significant counter-current heat exchanger, combustion exhaust gas temperature and thermal conductivity of the oil exports of the following temperature at 30C.

Gas-fired steam seller 4t fired boiler industrial philippines safe operation Tidbits gas steam boiler safe operation Tips 1. The operator should be familiar with the structure and principles of the furnace and the production of basic requirements for thermal equipment, and constantly sum up experience in practice, control coal thickness, so that the full combustion reduce chimney smoke, protect the equipment in a safe, efficient operation. 2. The new oil furnace or restart long home, gas steam shall dehydration stage heating requirements. 3. export oil temperature should be set below 280 ℃, when the oil temperature exceeds 200 ℃, should pay more attention to temperature, oil temperature should slow down, only non-oil change and over-temperature operation. 4. close contact with production, timely and slow down the oil temperature, while meeting production requirements, taking oil lower, will help extend the life of gas and steam energy savings. The normal oil level: the lower tank oil level is low, high-high oil groove. This ensures that the emergency shutdown when cold oil replacement system and prevents air from entering the pipe. When the high slot in a low oil level should start to replenish gas steam injection pump. 6. The circulation pump is allowed outage in the operation of the burner, when the pump is failure or power outage, Fan stop, depending on oil temperature and take appropriate emergency measures: rapid opening valve 7, the cold head tank oil up through the furnace coils to the low tank. 8. Coal and wet coal hearth fire or discharge out of the furnace, non-water washed pouring furnace. These measures should be completed within 3 to 5 minutes, to prevent the high oil temperature coke deposits other accidents. 9. normal shutdown, the oil temperature should be reduced to below 100 ℃, stop the pump before. 10. When the outlet pressure differential below the set value, the induced draft fan should outage. Then there is a fault system, feedback should be immediately removed or, if necessary, should pressure fire outage. 11. fireman should stick to their posts, do a good job operating records and shift work, and regular inspection and maintenance equipment.