supermarket gas hot water fire tube boiler

You know how the supermarket hot water fire tube boiler works? Boiler parameters is a main boiler performance indicators, including the boiler capacity, steam pressure, steam temperature, water temperature and the like. Boiler capacity available rated maximum continuous evaporation or evaporation is represented. Rated evaporation under a predetermined outlet pressure, temperature and efficiency, the amount of steam per unit time of continuous production. Maximum continuous evaporation under a predetermined outlet pressure, temperature, per unit time the maximum continuous amount of steam produced. Steam pressure and temperature parameters including steam boiler, generally refers to a superheater, superheated steam pressure and temperature at the outlet of the reheater and superheater if no reheater, saturated steam pressure and temperature at the outlet of the boiler refers. Refers to a water temperature of the economizer inlet temperature, inlet temperature refers drum without economizer. Boilers can be categorized in different ways. Boiler use can be divided industrial boilers, utility boilers, marine boilers and boiler locomotive; by the boiler outlet pressure can be divided into low, medium, high pressure, high pressure, sub-critical pressure, the supercritical pressure boiler; boiler and by water flue gas flow path can be divided into the fire tube boilers, fire tube boilers and water-tube boilers, fire tube boilers and wherein the fire tube boiler and collectively shell boiler; press cycle can be divided into natural circulation boiler, auxiliary boiler cycle (i.e., forced-circulation boilers), and the combined circulation boiler once-through boiler; by combustion, the boiler chamber into the burner, and boiling Stoker furnace. Water vapor system, feedwater heated to a temperature in the heater, the water supply pipe into the economizer, after further heating into the drum, along with the mixing pot of water down to the water wall downcomer inlet header. Radiative heat absorbing soda water formed by the mixture in the riser in the drum reaches the waterwall tubes, the water from the steam separator means, steam separation. The separated saturated steam from the superheater to the upper stream drum, continue to become superheated steam endothermic certain temperature (most of the current 300MW, 600MW unit main steam temperature is about 540 ℃), and then sent to the turbine. In terms of combustion and flue gas system, the air blower into the air preheater is heated to a certain temperature. It is ground to certain fineness in the mill coal, a portion of the hot air from the air preheater carried into the furnace through a burner. Discharging pulverized coal burner and combustion air mixture is mixed with the rest of the hot air in the furnace and release large amount of heat. The hot flue gas flowing through the furnace sequence after combustion, Slag bundle, the superheater, economizer and air preheater, and then through the dust removal device, wherein the fly ash is removed, and finally sent to the chimney by the induced draft fan to the atmosphere.

Battle blue horn sounded, emissions of sulfur, nitrogen and oxygen compounds gradually strict national requirements. To improve the quality of the environment, but also the people a blue sky, in all industries around the environmentally friendly product revolution, Hainan Sinochem Pharmaceutical companies are no exception. By the company investigation and comparison of supermarket hot water fire tube boiler products, in March 2017 signed a six-ton ​​steam-cleaning integrated condensing gas boiler and steam fast boiler. Tested and post feedback, the boiler equipment installation qualification, operating normally, and successfully passed the inspection by local quality inspection departments of the boiler.

Note Di steam supermarket hot water fire tube boiler steam boiler operational considerations should use great caution when using, because the slightest error will bring harm, so the operation should be more cautious, for a description of the use of steam boilers, process clear operation should pay attention It matters. Biomass boiler is a kind of boiler to biomass energy as a boiler fuel called biomass boilers, steam boilers into biomass, biomass hot water boiler, biomass stove, biomass thermal oil heaters, vertical raw biomass boilers, biomass boilers and other horizontal. Steam boiler is an energy conversion device, the energy input to the boiler fuel chemical energy, electrical energy, thermal energy and other forms of high temperature flue gas, and after converting the boiler, the steam output having a certain outside thermal energy, high-temperature hot water or an organic carrier. According to many years of experience in the use of steam boilers, summarizes the operating steam boiler matters should be noted: First, before the boiler to be familiar with the use of manual, to protect the normal use of safety equipment and operating personnel fundamentally. Before starting, check the power supply voltage is operating properly and water, close the drain valve to open the water supply valve, the pump checks whether the jam, remove the blade cover, and the motor shaft to the flexible state to start the scroll machine. Check the boiler or the power off when changing accessories to avoid the risk caused by the charging operation. Secondly, the electronic control box, pumps, motors and other components should be avoided in order to prevent moisture absorption burning boiler should pay attention to maintaining clean, according to the relevant boiler water quality requirements, be sure to install a water softener use, because they do not use a water softener can cause boiler fouling, serious it can cause burst pipes, shortening the life of the boiler. Finally, if the above conditions are not covered by the warranty, if not used in accordance with the provisions of water treatment equipment, sewage note that when used. Emissions once a day, with pressure 0.1MPa-0.15MPa emissions to prevent clogging pipes, sewage pipes should be connected properly to prevent burns, the safety valve should be flexible maintenance plans, pull the lever at least once a month safety valve to check its take-off and elastic seat. Local Technical Supervision safety valve should be checked once a year.

6 tons gas steam supermarket hot water fire tube boiler steam pressure adjusting a boiler operation, must frequently monitor the pressure gauge indicated. To maintain stable steam pressure, boiler pressure must not exceed the design pressure. Second, increasing boiler load: Steam pressure decreased boiler load is increased, if the level is high at this time, the amount of water should be reduced to a water supply or suspend, the amount of coal and increase the air volume. Gradually increase the amount of water at the same time to strengthen the burning, keep the steam pressure and the water level is normal. Third, the boiler load reduction: the vapor pressure rises to reduce boiler load, if the level is high at this time, the amount of coal should be reduced and the air volume, reduced combustion. Then the appropriate water reduction or suspension of water supply to the water vapor pressure and stability in the nominal range. Then press the normal combustion and the amount of feed water 8 to adjust. If the actual water level within the boiler is low, to increase the amount of water should, until the water level returns to normal after the combustion and needs to be adjusted according to the water vapor pressure and load changes.