boiler Agent Energy Saving 8t Myanmar

Gas heating hot water boiler agent energy saving 8t myanmars 10000 level schools with the number of MW? The most commonly used for school heating is gas hot water boiler, then the 10000 level schools much MW gas heating hot water boiler with it? Below small make a simple for everyone to share. In general, the area of ​​10,000 square meters of heating boiler 0.7MW meet the basic, accounting for the tonnage word is about 1 ton. Of course there will be exceptions, for example, that we project to have high altitude, low temperature or natural conditions, then use the number of MW boiler will naturally rise, then, will have to be adjusted based on the actual number of cases MW boiler, in order to ensure the smooth and normal boiler operation. Another is the use of heating based on our 10,000 square meters site of the actual situation, the tonnage will also be adjusted, for example, the number of units will be adjusted, tonnage has been adjusted, but the number of tonnage or MW, or constant, of course, if the other boiler installation program can be designed to achieve a similar effect with this, there is no need to consider the issue of tonnage or number of units of the adjustment. In short 10,000 MW level schools much gas heating hot water boiler with this issue, we want to determine the final choice based on a comprehensive analysis of natural and human conditions to ensure the effectiveness of the latter can reach a more satisfactory results.

This year, Hubei Province, will continue to carry out prevention and control of air pollution control, effectively promote the province's environmental air quality improved, and issued the "2019 Annual Hubei ecological system of air pollution prevention and control program of work", as follows.

First, ultra-low emissions and actively promote the transformation of key industries. The province's new coal-fired thermal power units fully implemented ultra-low emissions standards. Actively promote small coal-fired thermal power ultra-low emission transformation, Wuhan, Xiangyang, Yichang and other places to complete before the end of 2019. Circulating fluidized bed boiler unit to achieve ultra-low emissions before the year 2019, tobacco dust W flame boiler units, to achieve ultra-low sulfur dioxide emission limit requirements. Ultra-low emissions and actively promote the transformation of the steel industry, the whole process to reduce air pollutant emissions.

Second, the depth of key industries mentioned standard upgrade. Promote the implementation of major cities in key industries especially emission limits, strictly enforce the "Notice on the implementation of some key cities in particular air pollutants emission limits" (Provincial Environmental Protection Bureau Bulletin 2018 No. 2), advance planning to enact governance project, and accelerating coking industry desulfurization and denitrification projects. According to the national unified deployment and actively carry out industrial furnaces governance special action. Complete waste discharge permit issued in accordance with the work list management requirements.

Third, the total coal consumption in key areas to promote control. Actively cooperate with relevant departments to implement controls total coal consumption in key areas, focusing on reduction of non-coal for electricity. With the relevant departments to promote the commercial coal quality control and supervision of bulk coal sales, strengthen the management and control of coal consumption, promoting the use of clean coal.

Fourth, the optimal adjustment of high-pollution fuel combustion zone ban. Control Department of Ecology Environment "high-pollution fuel directory" to improve the demand by the City People's Government in accordance with the ambient air quality, energy consumption structure and affordability, local conditions choose ban combustion zone ban burning of the fuel mix category, supervise the implementation of the relevant control requirements. Urban cities and states to complete high-pollution fuel combustion zone ban optimal adjustment before the end of 2019.

Fifth, to carry out rectification of coal-fired boilers. Carry out coal-fired boilers out of looking back, resolutely combat the resurgence of acts of the boiler has been eliminated. The county level and above urban area actively eliminate 10 tons of steam per hour coal-fired boilers and furnaces and tea, operating the stove, grain storage and drying equipment, coal-fired facilities, in principle, to a new 35 tons of steam per hour of fuel coal boiler. Actively promote the upgrading coal-fired boilers environmental protection facilities renovation and construction of facilities on-line monitoring, adherence to the "gas will change," the principle of steady progress "from coal to gas."

Quote boiler agent energy saving 8t myanmar gas boiler and pressure Notes specific tonnage: gas boiler for this kind of boiler, its learning and understanding, can be said to be necessary because of the type of boiler that is both a website product involved, and also the boiler the common and common species. So, this will have specific requirements. Well, since the requirements will be made, and that below, it might be carried out immediately, so that you can also consolidate existing before everyone learning outcomes. 1. gas boiler, which uses natural gas, then, that on the boiler pressure, how much is? Gas boiler, which uses this fuel is natural gas, then the system pressure of the boiler, is in 10-20kPa this range, therefore, on this point, we should have a clear understanding of, and at the same time, it should be keep in mind, in this way can be well controlled within the reasonable range, and thus avoid gas-fired boiler in the course, the emergence of various problems. 2.2 tons of gas boilers, the amount of natural gas it needs per hour, whether different boiler manufacturers, is not the same? 2 tons of gas boilers, the amount of natural gas required per hour, it can be said, for different production boiler manufacturers, is certainly not the same, it can not be exactly the same. So, on this issue, that the answer is yes. However, it is to have a general range is 150-160 cubic meters / hour.

After a long period of use, the boiler agent energy saving 8t myanmar will accumulate carbon. Boiler cleaning is aimed at the coking and carbon accumulation of the boiler in the process of operation. It is a good solution to the contradiction of boiler cleaning affecting production, and the conventional cleaning technology will produce a large amount of waste water. Let's take a look at it. 1. Decoking cleaning: adding diluted detergent to the boiler system and filling the boiler system with a high trough water level of 1 / 2. Amount of coke remover: 10% and 20% according to scale thickness to determine the specific dosage. Temperature: 90 ℃ 95 ℃, time: 12 h 72 hours, according to scale thickness can be determined. 2, rinse cleaning: boiler cleaning system after cleaning Rinse with clean water for 2 times until the coke cleaner is free of foam and the water is clear. Temperature: 85 ℃, 95 ℃, time: 5 hours. 3, blow the water step: after the boiler is cleaned, connect the air compressor at the pressure gauge or other connectable place, use compressed air to boost the system to 0.3 to 0.4 MPA, and empty at each low point, so repeated until the water is blown out.