For Sale Industrial Natural Gas boiler Myanmar

When the 40 tons SZS series gas and oil fired for sale industrial boiler myanmar is running, the fuel enters the burner from the external air source, and automatically generates a high temperature flame through the automatic adjustment and automatic ignition function. The front end of the furnace enters the convection heating surface on the upper side of the burnout chamber, and then enters through the upper part of the front smoke box. the second part. The convection heating surface exits the boiler from the rear of the rear smoke box and is vented to the atmosphere. The saturated steam is generated by heating, and the working fluid is output from the main steam valve to the operating system.

With the increase of air supply volume, the mixture of oil mist and air is improved, which is beneficial to combustion. However, if the air volume is too large, the furnace temperature will be decreased and the incomplete combustion loss will be increased. At the same time, the heat loss of exhaust gas will be increased and the power consumption of the fan will be increased because of the increase of flue gas. If the air volume is insufficient, the combustion will be incomplete, resulting in carbon deposition at the tail, which is prone to secondary combustion accidents. Therefore, each for sale industrial boiler myanmar should pass the thermal efficiency test to determine its economic air volume at different loads. In practice, the stoves usually take into account the ignition of the nozzle and the carbon dioxide or oxygen content in the flue gas. Content to adjust the supply air volume. If it is found that the combustion condition of a nozzle is not good, or if the atomization plate with different aperture is replaced, the air pressure of the supply duct should be kept unchanged, and the opening degree of the duct baffle of the nozzle should be adjusted to normal combustion. If the fuel quantity changes due to the change of the oil pressure in front of the furnace, the opening of the fan baffle should be adjusted to achieve normal combustion by changing the air pressure and air volume of the air supply duct when it is necessary to adjust the supply air volume.

3) the observation and analysis of all kinds of flame when adjusting the fuel oil. Generally through the fire point adjustment and flame center adjustment to complete the flame adjustment. The ignition point of the oil mist should be close to the nozzle, but there should be no tempering. Early ignition is beneficial to complete combustion and stability of oil mist. However, the fire is too early, too close to the nozzle, easy to burn the nozzle and furnace wall to determine the mouth. Furnace temperature flying oil varieties and atomization quality, as well as air volume, wind speed and oil temperature, will affect the distance and proximity of the ignition point. So if you want to adjust the ignition point, you should find out the cause in advance, and then take targeted measures. When the boiler load is constant and the oil pressure and oil temperature are stable, Should be based on the ignition point wind speed and wind distribution situation.

To protect the economic development of enterprises, production safety running smoothly, according to Qingyang County in Anhui Chizhou municipal government air pollution control requirements, coal-fired for sale industrial boiler myanmar inspection pull the plug on a regular basis in October 2018.

Qingyang County Market Supervisory Authority for the county a number of companies were visited research to understand the company's current production operating conditions and problems, start from regulatory functions, for enterprise development to provide quality services, reduce business costs.

Special equipment boiler pressure is high risk, than a regular inspection cycle must immediately stop using, but they are also necessary for the production of business equipment, once the shutdown enterprises will face shutdown. Looking at business owners anxious eyes and counties actively discussing with the city center expert special inspection, and according to regulations, to quickly determine a set of effective programs and promptly inform each enterprise.

Through contact with the surrounding counties and cities to understand the relevant units of the boiler fuel change fees and counties take the initiative and boiler companies approached agreed upon with the use of rehabilitation programs, a significant reduction in transformation costs. Up to now, Qingyang County has completed 12 boiler fuel change work, the cumulative cost of more than 60 million.

6 ton industrial wood fired steam for sale industrial boiler myanmar features:

1. Furnace and the two sides of burner zone adopts membrane water-cooled furnace structure. The membrane structure of wood fired steam boiler, our company’s solely design once used in electric boiler , is now applied in shaped assemble boiler. Its advantages lie in great thermal transmission heat, better heat transfer effect, lower heat loss ,better air impermeability, no wall distortion and no ash leakage.

2. The structure of arches adopts the newest technology --the upside”a” technology, which is awarded the national science and technology prize. The front arch is high and short while the back arch is low and long. And the part near the exit is inverse inclined type,while the front arch is 45ºinclined type, they together form a downside a flame structure,which makes the lean coal combustion easier and it can adjust itself to a wide rang of coal types. In this way, the flue gas is kept within the furnace a longer time, and the combustion efficiency is higher. The streamline shaped back arch can throw the non-burned carbon grains in the middle and back part of furnace to the front, so that the coal can be easier to be ignited and the ignition lines are tide.

3. The wood fired steam boiler adopts double layers or single layer layout structure, which can meet the customers’ requirements better.