Our company processes in multiple new energy automobile production will need to heat, the food vacuum boiler dealer equipment we choose is really a headache, fast Boiler solve our urgent needs. The purchase of electric water boiler system is simple, easy to operate, easy to maintain, high thermal efficiency, saving a lot of operating costs for our company. --customer feedback

Energy in the cane sugar mill

The remaining fibrous solids, called bagasse, are burned for fuel in the cane sugar mill's steam boilers. These boilers produce high-pressure steam, which is passed through a turbine to generate electrical energy (cogeneration).The exhaust steam from the turbine is passed through the multiple effect evaporator station and used to heat vacuum pans in the crystallization stage as well as for other heating purposes in the cane sugar mill.

How to vacuum hot water food vacuum boiler dealer, comparative advantages and disadvantages: a vacuum hot water boiler works as follows: When vacuum hot water boiler, the furnace body heat medium water absorption under a negative pressure state of the fuel combustion energy released as heat of vaporization and boiling negative pressure steam of the same temperature medium water, steam and stainless steel heat exchanger for heat exchange, releasing latent heat of vaporization, the water circulating inside the heat exchanger. After the formation of condensed water vapor droplets fall to the heat medium is again heated water evaporated, thus completing the cycle.

Boiler feed water is necessary to control item 1, suspension criteria: When the food vacuum boiler dealer feed water of the raw water from surface water, depending on the number of suspended solids and colloidal content in water, can be selected coagulation, sedimentation and filtration techniques; when the raw water is groundwater, general just filtration, which is high iron content, increased iron manganese sand filter measures. 2, standard hardness: mainly many ways to prevent or control fouling, hardness removal, lime softening, softening agents exchange, but the most common, is the best approach to ion exchange softening effect, newer methods nanofiltration is law. 3, dissolved solids standard: When the salinity pot of water reaches a certain limit, it will generate priming, resulting in a sharp deterioration in the quality of the steam boiler. Many water quality demanding industries, such as the electronics industry and power plants and other boilers with high pressure, dissolved solids of the water has more stringent requirements. Method of reducing dissolved solids generally referred to as desalting, the main methods are: ion exchange, electrodialysis, reverse osmosis, the traditional process to use an ion exchange method, a method for updating a reverse osmosis membrane method. 4, DO standard: DO is mainly to prevent the corrosion of the furnace and the duct, the general heat deaerator, there are other oxygen chemical, electrochemical oxygen, vacuum deaerator like. 5, PH value and alkalinity boiler water standards: when boiler water is alkaline (pH 10-12), in order to make the fouling substance becomes slag to clear. Commonly used dosing method. 6, the relative standard alkalinity: primarily prevents the generation of caustic embrittlement. - scale boiler cleaning equipment, boiler feed water equipment, boiler water softening equipment, boiler desalted water softening device 7, the standard oil content: boiler water is mainly to prevent foaming, with formation of oily scale. Techniques employed degreasing water separator and the like. In cities and towns, the boiler feed water is generally tap water as raw water, drinking water according to the national standard, which turbidity is not more than 5, the total dissolved solids <1000mg / l, PH = 6.5-8.5, no oil, generally only the hardness of the boiler does not meet the standards water supply requirements, for industrial low-pressure boilers and hot water boilers, only the configuration softening process.