Distributor Energy Saving 1t oil boiler Laos

Boiler burner selection techniques to select the type of burner nozzle atomization or gas burner and furnace distributor energy saving 1t boiler laos performance according to the structure, which is the most important point. Today we take a closer look. Burner output should match the rated output of the boiler, choose a good shape of the flame, such as length and diameter so as to adapt the furnace structure. The required combustion air is supplied from the root flare fuel gas and air or oil mist uniformly mixed rapidly, to ensure complete combustion. The rated output of the boiler and boiler efficiency is determined, the fuel consumption is calculated, and then selected according to power a single burner arranged to determine the number of burners. Increase the number of burners, in favor of the atomization quality assurance wind oil mix, but too many, and not easy to operation and maintenance, will give burner arrangement difficult. Adjusting the burner to a large extent, be able to adapt to changes in boiler load, to ensure complete stable combustion under different conditions. Fuel atomization less energy consumption, adjusting the wind resistance of the device to be small. Effects of smoke and noise emissions must comply with environmental standards, the main emissions must be below national requirements, should use low-noise and low burner. There are integral and split two ways boiler burner assembly. I.e. monolithic burner body, the burner and a combustion air blower system (including an oil pump, a solenoid valve, a servo motor or the like) into one; split i.e. burner body (comprising a combustion head, oil or gas systems), fans and combustion burner control system (including the control box, fan thermal relay, AC contactor, etc.) are each independent three-part system, according to the specific requirements of the boiler and user choice. We should use a simple structure, reliable operation, easy to adjust and control the repair, easy to implement automatic control of the combustion process in the burner. Respond burner brand, performance, price, and service life of comprehensive comparison. In addition to the burner air pressure to be considered to overcome the resistance of the outer boiler, economizer and also to overcome the resistance of the flue gas system.

After years of efforts, the overall governance of Beijing's total coal consumption has achieved initial results. By the end of 2017, all of the total coal consumption of 4.85 million tons, accounting for only 5.6% of the city's total coal consumption, coal-fired completed three years ahead of "Thirteen Five" energy development plan period proposed control in less than five million tons The goal.

By 2013 to 2017 for five consecutive years to promote the work Yajian coal, Beijing successfully completed the first phase of the "Yajian based" Yajian coal work, go to "run mainly to protect", established clean energy use long-term mechanism to combat second phase coal-fired rebound. Beijing's total coal consumption in the future will be long-term control in less than 4.2 million tons, coal is mainly used for urban hazardous waste incineration, energy and protect the city safe operation of remote mountain villages Beijing winter heating three aspects.

As of last heating season, heating central heating proportion of clean energy in Beijing has reached 98%, in addition to parts of Pinggu and Yanqing, Miyun three zones as well as six coal-fired heating boiler room, other regions have achieved heating boilers no Coal.

This year, Beijing will complete the rural village 450 villages, the villagers coal public spaces and 53,000 square meters of agricultural facilities Zizhong change clean energy work, and strive to complete the Yanqing east of central heating central heating fuel in pre-season coal boiler clean energy transformation, in an orderly coal-fired heating center south of Yanqing, Pinggu Riverside, Xinggu, Miyun Taishi Tuen urban and non-built-up areas boiler clean energy transformation.

In addition, this year, Beijing Yanshan Petrochemical Industries will start coal-fired facilities clean energy transformation, and continue to consolidate six districts of the city, the southern plains "No Coal" results have been achieved on the area of ​​clean energy transformation, embargo, ban, ban save bulk coal, to prevent rebound.

Speed ​​up the construction of clean energy facilities, Beijing will work to enhance the rural town of Plains gas pipeline network construction, improve rural consumption of clean energy supply security capacity, promote Plains natural gas pipeline "through town." In the gas network facilities are relatively weak areas, speed up the liquefied natural gas, compressed natural gas supply facilities, increase the supply capacity of natural gas distribution in rural areas. At the same time, we continue to promote the 2018 "from coal to gas," "coal to electricity" supporting gas engineering and construction of power transmission project, to meet the full 2018-- coal to clean energy by 2019 energy demand for the heating season.

2.4MW YQW series gas-fired horizontal thermal oil heater for food industryChongqing Sanyi Food Co., Ltd. is a modern food enterprise engaged in the production and sales of hot pot butter products and hotpot seasonings. Sanyi Food combines the second generation technology of advanced "physical high temperature deacidification" with the traditional process, in which the stable heat source provided by the distributor energy saving 1t boiler laos meets the high temperature requirements of the production line.As the products sell well, Sanyi Food has built a modern comprehensive production base of more than 20,000 square meters in 2016, which adopted advanced automated production lines, and it was urgent to introduce energy-efficient boilers and use clean energy natural gas as fuel. ZOZEN became the boiler supplier of Sanyi Food due to its outstanding advantages in product performance and environmental protection effects. In order to meet the different requirements of the production line for temperature, ZOZEN customized the combination of YQW series thermal oil heater + WNS series gas-fired steam boiler system. Among them, YQW series thermal oil heater adopts forced circulation three-pass circular tube design for the sufficient heating surface. The energy-saving device added on the tail of the furnace body can greatly reduce heat loss, and the thermal efficiency is up to 95%. In addition, these two series of boilers are both equipped with advanced low NOx burner to realize the low emissions of NOx ≤ 30mg/Nm³; Moreover, the boilers are both adopt the packaged structure, after the boiler components are transported to the site, they can be put into operation once connecting to the electricity and gas, which greatly reduces the boiler installation cost.

6 tons of chemical technology chemical parameters of natural gas steam distributor energy saving 1t boiler laoss 6 tons of natural gas steam boiler technical parameters? Nowadays, people's food, clothing and housing are inseparable from the so-called chemical products. Chemical and chemical industry can be referred to as chemical, petroleum, pharmaceuticals, agriculture and so a place in the chemical industry. As chemical products processing, and various chemical plants, although there will be differences in the production process, but they can not leave some processing all the necessary equipment, steam boilers and other production. 6 tons WNS gas steam boiler, chemical production fast boiler dedicated premix combustion boiler technology, wings tubes, of FGR other new technology to increase the thermal efficiency of the boiler. Manufacturers increase production capacity. 6 tons of gas steam boiler technical parameters are as follows: Model Rated evaporation (6t / h) rated steam pressure (1.6.MPa) WNS6-1.6Y (Q) of natural gas, light oil and heavy oil fast filling. Of course, six tons of gas steam boiler is representative of WNS boiler, three times the structure, energy-efficient gas boiler. Six tons of steam boiler is mainly used in small-scale production and use is very diverse. Class 6 t good gas-fired boiler structure, take up less space, and a low one-time investment, high thermal efficiency.