Use hot water boiler hot selling industrial 8t myanmar and hot water boiler works mainly heating and bathing two purposes. Through the hot water circulation pump circulating the hot water tank insulation, the heating cycle hot water tank, may be achieved bath object; circulation pump for circulating water through the hot water heating conduit, through the heat sink (radiator) can live up to the requirements of heating ; hot water boiler and hot water circulating pump with heat exchanger can be achieved bathing and heating dual function. Natural circulation boiler water, into the water were taken over from the top of the drum, the water from the water distribution pipe guide and drop into the front side lower header pipe, through the waterwall tubes heating rise. The front drum, rear end plate is provided with impermeable boundary falling rising flow, only the lower half of the drum cross-impermeable partition plate. For the forced circulation, the water access to the front end of the lower header, the front drum increases to upper waterwall tubes (waterwall downcomer Cancellation time), and then transferred to the waterwall tubes downcomer side to side lower header, then into the side of the cloth water wall tube rose to the drum, and from the front row convection bank down to the next drum, and finally between the upper and lower drum and several circuitous flow of water from the rear end of the drum.

CFBC Boiler: 204㎡

In China, AFBC boilers were popular in 1980s. Nowadays, with higher technology update, CFBC boiler takes more market shares. In 2015, our 115 MW CFBC Hot Water Boiler listed as first in national technology development study with 91.86% high combustion efficiency, widely used in thermal power plant, chemical industry, etc. However, the writer does not say, AFBC boiler time is over. To those low grade coal or fuels, AFBC boiler has its light spot.

One bright spot: small footprint design Integrated economizer, air preheater and integrated body design, saving space. Highlights II: advanced cooling technology of low temperature exhaust gas adopts a new environmentally friendly energy efficient technology Ultraten wings tube, the flue gas heat recovery efficiency. Wings built finned tubes, the cooling water does not flow outside the tube fouling; tearing groove design fin heat transfer area is increased 5-fold, sufficiently absorb latent heat of vaporization in the flue gas, a high heat recovery rate; silicon alloy material, corrosion resistance and long life. Highlight three: original elliptical smoke tube air preheater to reduce operating costs oblong stainless steel tube 304, a large contact surface wind resistance, the higher the heat exchange system, improve the supply air temperature, significantly reduce operating costs; corrosion-resistant stainless steel tube 304 high, high voltage resistance to high strength and durability. Highlight four: PLC intelligent control high degree of automation all Chinese color touch screen, real-time dynamic display boiler hot selling industrial 8t myanmar operating conditions; multi-level pop-up menu, simple man-machine interaction; cloud big data services 3.0 support to ensure the safe operation of the boiler.

What are the key points of operation of fully premixed condensing boiler hot selling industrial 8t myanmar

When the condensing boiler is used, it adopts a special principle to make use of the way of water circulation to produce a certain heat exchange so as to achieve the desired purpose. Although the price of the integrated condensing boiler will not be too high, and the operation is very simple, and has good safety performance and so on, but in the process of operation, it is necessary to pay attention to the following points.

1, pre-service preparations for long-term non-operational or brand-new fully premixed condensing boilers, clean up the system with water before starting again, this is an extremely important preparatory work for condensing boilers. The operation of the docking will be of great help. And condensing boiler manufacturers remind you to start in the correct order, such as turning the circulating pump on before you can ignite it.

2, in order to control the details of the operation of the condensing boiler during its operation, in order to make it work better, the pressure in the boiler should always be in a stable state, and the temperature in the boiler should be controlled. Therefore, at any time to monitor and monitor the discovery of any changes should be made certain adjustments. And condensing boiler manufacturers emphasize that the gas in the pipe network should be discharged from time to time, which can prevent vaporization well, at the same time, it should be carried out regularly and the quantity of water in the pipe network should be reasonably distributed.

3, to control the pressure in the boiler well, if the pressure inside the boiler suddenly rises very high during the use of the fully premixed aluminum condensing boiler, it should be immediately found out the cause, usually because the water temperature is too high for gasification. Therefore, the water temperature should be properly lowered to solve this problem. It is also possible that clogging occurs because the dirt in it has not been cleaned up, so the cleanup should be done in a timely manner. If, however, the pressure of the condensing boiler is suddenly reduced, the boiler should be rehydrated in a timely manner, as this is mainly due to the shortage of water.