1 ton boiler how much heating oil consume

Natural gas and oil are widely used in different countries and regions, and various natural gas pipelines are densely packed and convenient to purchase. For oil and gas 1 ton boiler how much heating consumes, the use of natural gas, petroleum and other fuels can be piped, which saves on site and labor costs. Moreover, natural gas fuel is a clean energy source that can reduce sulfur dioxide and dust emissions, reduce carbon dioxide emissions and nitrogen oxides emissions, help reduce acid rain formation, soothe the global warming effect, and improve environmental quality.

When long-term disabled 1 ton boiler how much heating consume, furnace should pay great attention to external corrosion and maintenance problems. First, the boiler shutdown cooling, heating surface must be thoroughly cleaned and the fouling of the upper grate, the lower portion of the furnace ash. Then to maintain a certain degree of natural ventilation flue. In general, in order desiccant moisture should be placed in the furnace, flue. The quicklime as a drying agent, within the furnace or flue gas per cubic meter should be placed generally about 3kg. After placing all the ventilation should be tightly closed doors. After the change of lime powder to be replaced. Low-lying position as boiler room, ground during shutdown severe flood tide, often approach should be used and placed a small fire to dry desiccant combination. If the boiler shutdown a long time, after the complete removal of soot coated with an anti-corrosion red lead paint in oil or other metal surface furnace.

Recently, the State Administration of China's market, the National Development and Reform Commission, Ministry of Ecology Environment jointly issued the "Notice on Strengthening Environmental Protection and Energy 1 ton boiler how much heating consumes" (the "Notice"), put forward specific requirements for environmental aspects of energy-saving boiler work.

"Notice" the implementation of the guidance, "the CPC Central Committee and State Council on the overall strengthening of environmental protection and resolutely fight tough fight pollution prevention advice" and other documents, adhere to safety first, prevention first, the five principles of energy saving, comprehensive management implement energy saving boiler from the production, import, sale, use and other aspects of business to post the main responsibility, and strengthen supervision and management of Eng environmental Protection in the "special equipment Catalog" range of boilers, and comprehensively promote energy-saving environmental governance boiler.

First, across the country, in principle, to a new 10 steam tons / hour of coal-fired boilers and, in key areas (and the surrounding areas of Beijing, Tianjin, the Yangtze River Delta region and Fenwei plain) and the rest of the city built the county level and above New District, in principle, to 35 tons of steam / hour of coal-fired boilers.

Second, the new coal-fired boiler emission concentration of air pollutants key areas need to meet ultra-low emission (6% on the basis of the reference oxygen, soot, sulfur dioxide, nitrogen oxides emission concentration of not more than 10,35,50 mg / m) requirements.

Third, the area reserved execution key boiler air pollutant emission limits or special places more stringent emission standards, 65 t steam / hour coal-fired boiler and above all of the ultra-low emissions and energy transformation embodiments, a low nitrogen gas boiler is substantially complete transformation.

"Notice" also stressed the upgrade boilers with energy and environmental conservation requirements. Boiler units to implement the main responsibility for ensuring that the boiler energy efficiency and emissions of air pollutants meet legal regulations, technical specifications and requirements of the relevant standards in China.

Fourth, for the boilers do not meet environmental requirements, and use shall take appropriate measures for improvement, if after rectification not meet the requirements, be allowed to continue to use.

Fifth, the boiler unit to apply for emission permits in accordance with laws and regulations, and to establish their own monitoring system, strict discipline and preservation of the environment management accounting, timely and relevant departments to prepare and submit emission permits implementation report.

Sixth, the boiler unit to promptly take the initiative to report the boiler equipment obsolete, and apply for cancellation of the boiler use registration shall not be obsolete boilers to move equipment or put into use again.

Burner and flue installation and electrical installation and the fuel supply system of the burner 1, burner 1) before installation read "burner manual", according to the installation requirements. 2) Burner mounting flange, the middle requirements, to ensure the burner to the 1 ton boiler how much heating consume flue gas does not leak at the interface. 2, the installation of fuel supply system (see schematic) Note: To prevent a fire caused by generation of static electricity in the fuel tank, the tank should have a good grounding. 1) supply system tank top tank top-feed system suction recommended distance between the back plane and the tubing inside diameter of the oil pump axis, the total length of the suction pipe Hm, m, no greater than DL6-34DL40-75DL100-250Di = 10mmDi = 14mmDi = 16mm0.51.03030401.535452.03535452.540503.0404050 Notes: (1) when there is an elbow or valve on the suction pipe, each of the length of the suction pipe to be minus 0.25m. (2) Di recommended internal diameter suction pipe and return pipe. 2) the distance between the bottom of the tank bottom of the tank supply system supply system pipe inner diameter recommended oil pump axis and a plane, the total length of the suction pipe Hm, m, no greater than DL6-34DL40-75DL100-250Di = 10mmDi = 14mmDi = 16mm1.03030401.535452.03535452.540503.04040504.045 Notes: (1) when there is an elbow or valve on the suction pipe, each of the length of the suction pipe to be minus 0.25m. (2) Di recommended internal diameter suction pipe and return pipe. 3, gas pipe installation requirements Burner gas line itself has been connected, the intake port, the intake pipe bends should be minimized and good sealing performance requirements, to prevent leakage. (Iv) a chimney installation, to prevent leakage, the leakage of smoke, to prevent smoke inhalation chamber. 2, a vertical mounting, a right angle bend bends should be avoided. 3, the top of the chimney must be water-resistant measures. (E) mounting a power switch with electrical connection box 1, the power switch should be considered easy to operate, away from heat, fixation, meet the design requirements. 2, the use of 220V (380V), 50HZ power source, and a ground line. 3, voltage instability in the region use, should be safe regulators. Or affect the normal operation of the combustion engine. 4, the power cord to the electrical box must be connected in strict accordance with the requirements, otherwise, there will be dangerous!