oil horizontal boiler buy

Biomass horizontal boiler buy: rice husk, wood chip, palm shell, biomass pellets, tobacco stem, corn cob, bagasse

Multi-fuel fired boilers: Oil and gas dual purpose boiler

Steam horizontal boiler buy pressure gauge and hydraulic accumulator Henan fast boiler's steam boiler introduce small series with a pressure gauge and hydraulic accumulator steam boiler pressure gauge should pay attention to: 1, rated steam pressure of less than 2.45MPa steam boiler , not only the accuracy of the pressure gauge to 2.5; rated steam pressure 2.45MPa promoter or equal to a boiler, the pressure is too spread made not less than 1.5. Dial gauge diameter of not less than 100mm, in order to ensure the operation of the operator to see the surface of the pressure value shown. 2, should draw the red line on the dial gauge steam boiler, he pointed out that the maximum allowable working pressure. 3, the steam boiler pressure gauge should be provided at a convenient place to observe and purging, and to prevent the high temperature affected, freezing and vibration. 4, steam boiler pressure gauge should check at least every six months once the check should seal. 5, the pressure gauge connection tube steam boiler should leaks steam leakage phenomenon, otherwise it will reduce the pressure instruction value. 6, a steam boiler gauge scale element should be compatible with the measured working pressure, the working pressure is usually 1.5-3 times, preferably 2 times. When no steam boiler gauges, pressure gauges or pressure damage did not meet the requirements of the apparatus, boiler steam pressure gauges of the following circumstances, should stop using: 1, the surface glass breaking or blurred dial scale; 2, no seals , damage or seal verification period exceeded; 3, no pressure gauge pointer finite bit staple staple can not be restored to the limit at infinite set of bits from zero gauge pressure exceeds the pressure data bits garment allowable difference?; 4, the jump table or a pointer leak; 5, other effects gauge accurate defect. The use of the accumulator: the accumulator for a hydraulic accumulator system intermittent mechanical, hydraulic fluid may be stored in the actuator output when a batch or a low speed, and the actuator requires a large flow of fast-moving, as an auxiliary energy providing oil to the system together with the hydraulic pump, oil pump and thereby achieve miniaturization of the entire hydraulic system, to achieve the object of absorbing the impact energy sudden change fast opening and closing valve and the hydraulic load, the system generates a pressure shock, pet cause vibrations and noise, and even damage the machine. The accumulator can be alleviated, which absorb fluid shock absorber pressure pulsation absorbing accumulator, and reducing the pressure pulsation and flow pulsations of various pump, thereby reducing system noise and vibration. Having a damping effect of the gas spring accumulator, it can be used to absorb the mechanical vibrations between the body and the traveling wheel of the vehicle and the like. The accumulator can be balanced upright actuator (hydraulic cylinder) and gravity load decreases when the potential absorption into hydraulic energy store, while generating the rate-limiting resistance; upright when the actuator rises, releasing the original absorbing energy accumulator , together with the pump oil to the hydraulic cylinder, in order to achieve balance and energy.

Combustion Adjustment of dual-use oil and gas horizontal boiler buys (Skills) boiler firing was successful, the load can be adjusted to normal operation. At this point, we should always observe the furnace combustion, if there is a bad oil and gas atomization, beating the flame, the flame hit the furnace and the exhaust gas temperature is too high or too low and so, it is timely for oil pressure, oil temperature, of steam, wind, air pressure, steam pressure hanging line adjustments to ensure safe and economic operation of the boiler. Size and load size of hydraulic, pneumatic boiler related to the oil pressure adjusted by adjusting the back pressure or fuel burner to achieve the size, by adjusting the air pressure to achieve the degree of opening of the valve. Adjust the amount of oil, air pressure adjustment load, at the same time, air volume control, must be synchronized to ensure a reasonable match of oil and the amount of wind, so as to achieve economic operation of the boiler. 1, the combustion method of determining boiler fuel gas: C02 content is determined from the flue gases and excess air ratio (1) the combustion quality (2) determines the length of the flame from the combustion quality (3) from the flame color and smoke color determination 2 is good or bad combustion, fuel combustion boiler adjustment method: the normal combustion, furnace flame stability was white orange, generally rumble, or if the flame beating abnormal sound, should adjust the fuel and air volume. If the adjusted still no improvement, it should identify the cause flameout, the measures to be taken and re-ignition.

"Coal to gas", "coal to electricity" is the trend in recent years of China's reform horizontal boiler buys, all regions are gradually improving. But because some areas coal to gas, coal to electricity-related project has not been completed, the pipeline can not be normal delivery of natural gas and electricity, but there can not ban the use of burning coal for heating, resulting in some of the people cold.

Under Thus, this year, Hebei Province, will carry out the inspection work cleaning heating dragnet, scheduled for November 1 to 10, requires each village and household dragnet inspection, the gas supply, power supply is not guaranteed to get the premise not allowed to first dismantle heating stoves.

Inspection team is more than 2,000 people drawn from the province's environmental protection system, divided into 120 large groups, each group of sub-1-2 large counties (cities, districts), take the main city limits off-site inspection, cross-check each other, such as thorough investigation way, a comprehensive understanding of coal to gas, coal to electricity and clean coal work on behalf of the double security for the situation.

Wherein, the village 500 (cell) is not less than 20% of households checks; 500 villages and above (cell) checks no less than 10% of households. The main inspection five aspects, including: gas supply, power supply security, security for the clean coal and distribution, development of contingency plans, etc. under extremely adverse weather conditions. In gas supply, power supply is not guaranteed under the premise, the focus in advance to see if the removal of heating stoves situation.

Environmental Protection Department official said earlier this year in northern clean heating to proceed from reality, insist on the need for constant, the gas will change to ensure that clean heating and warm winter are guaranteed.