Commercial Distributor 4t Natural Gas steam boiler Philippines

Beijing SL Pharmaceutical Co., Ltd. as China's key high-tech enterprises, has great influence in the pharmaceutical industry. In early 2017, two-Heron relevant person in charge to get in touch fast boiler, double-Heron Pharmaceutical according to demand, our company to provide a 1-ton split steam condensing commercial distributor 4t steam boiler philippines, and is responsible for subsequent transportation, installation and commissioning work .

The preparation you need to do before the boiler is installed

The boiler is a device that supplies steam and hot water for industrial production or daily life. After the company purchases the boiler model, it needs to consider the installation problem. The installation of the boiler is directly related to the important steps of the smooth operation of the boiler, except for the installation of the auxiliary machine. Also need to pay attention to the preparation before installation.

1. Handling the registration of natural gas boiler installation: According to the “Safety Supervision Regulations for Steam Boilers”, the units that use the boilers should go through the registration procedures one by one. The boiler use unit shall have a person responsible for the boiler installation work, responsible for contacting the local boiler supervision agency and filling out the installation notice. When the boiler is installed, it must be attended by a furnace, and it is equipped with a pipeman, a fitter, a hoist, a cold workman, an electric welder and an auxiliary worker.

2. Determine the installation location and qualification of the boiler to determine the installation location. The boiler installation unit must have a boiler installation qualification certificate issued by the superior authority in accordance with the installation scope.

3. Inspection of boilers and accessories: Before the installation of natural gas boilers, the boiler body, combustion equipment, components, natural gas boiler auxiliary machines and accessories shall be inspected and accepted according to the drawings, and records shall be made. If it is found that the relevant standards are not met, it shall be promptly submitted to the factory. .

What is the working principle and composition of gas-fired commercial distributor 4t steam boiler philippines? Do you know any customer friends? The following is a technical explanation from the manufacturer of gas-fired steam boilers, which I hope will help you. A gas-fired steam boiler is a thermal energy conversion device that uses natural gas, liquefied gas, city gas and other gas fuels as fuel, burns the heat released from the furnace, heats the water in the pot, and vaporizes it into steam. The energy released from the combustion of a gas fuel in a boiler (pot) continuously heats up and the temperature rises to produce pressurized steam. The boiling point of water increases with the increase of pressure, and the seal of the boiler and the expansion of the water vapor are restricted to produce. Pressure is used to form thermal energy (the boiler's steam is strictly formed by constant pressure heating of water in the drum to re-vaporize saturated water) as an energy source. Gas-fired steam boiler is mainly composed of two main bodies, shell and furnace body, and an accessory, instrument auxiliary equipment, automatic control and protection system to ensure its safe and economical continuous operation. Gas-fired steam boiler is a boiler type boiler with water-cooled crucible. Gas-fired boiler has two return pyrotechnic tubes, arranged on the left and right sides, the front of the drum in front of the cigarette back. Between the roller and the lower box, there is a lower tube and a water-cooled manifold to form the frame of the combustion chamber. Roll There is a steam separator at the top of the tube to reduce moisture in the steam. The heating surface of the main body of the gas-fired steam boiler is the lower part of the drum, the water-cooled manifold and the pyrotechnic tube. It is very energy-efficient in gas-fired boilers. He has a high cost of fuel and liquefied gas and electric boilers. Gas-fired steam boiler is also a kind of protective boiler. When used, there will be dust and gas that damage our health. There will be no such problem with natural gas. The heat efficiency of gas steamer furnace is very high, can reach more than 90%! The point is that he has a long life. He uses very clean dyes, so he doesn't produce dust and smoke in the furnace when he burns. Grey, so his life is much longer than other boilers. In the development of boiler, he is developing towards the goal of environmental protection and energy saving.

Fuel gas control step and the blowing process air volume of the total fuel gas commercial distributor 4t steam boiler philippines steam boiler is achieved by adjusting a liquid coupling scoop blower. Organization fuel gas steam boiler combustion, is to make a, air pressure, air flow of secondary air with the good. Adjusting the amount of primary air should meet it carries the fuel into the furnace ignition of volatile oxygen required, and to maintain a certain speed, and without clogging the fuel discharge pipe of the jet having a certain rigidity. Primary air volume is too large and too small, the wind speed is too high and too low, should be avoided. In addition to adjusting the secondary air of combustion of the fuel should ensure that the oxygen demand, but must maintain a certain wind speed and primary air is mixed with the master time should have a strong stirring and mixing coke penetrate "the Gray" kinetic , which requires the case may be, each layer of the secondary air flow rate, in order to achieve stable combustion and flue gas excess oxygen appropriate destination. Fuel gas steam boiler, secondary air with what is better? Primary air volume air volume of the total share is called the primary air rate. A small air fraction, pulverized coal is heated to at least the heat required for the ignition point, fire faster, but the amount of primary air to satisfy the principle of combustion of volatiles. Secondary air mixed with the primary air time to the right. If it is mixed before ignition, means an increase in the amount of primary air, so that the ignition delay; hypoxia combustion secondary air if mixed will make late after ignition; if secondary air is mixed all at one position, since the secondary air temperature well below flame temperature, the flame temperature decreases, the combustion slows down, causing the fire. Therefore, the secondary air mixed with fuel should be based on the nature of the combustion zone as required timely sent, so that the combustion of oxygen, and will not reduce the flame temperature to ensure complete combustion and ignition stability. One or two wind speed with what is better? Fuel gas steam boiler once the wind speed is high, the fuel gas stream will catch fire in places far away from the burner, the ignition point postponed; once the wind speed is too low, it will cause a blocked ducts, and ignition point is too far forward, the burner will burn , but also easy to coke near the burner.