Oil-fired boiler combustion control and automation and whether the fuel tank on the role of specific types of boiler, this article will be introduced below, for this kind of boiler oil-fired boiler, but for now, this kind of boiler is widely application, is a common and popular types of boilers, so based on these two points, it should be taken seriously and work to learn the product, good to have a good use of effects through proper use. Notes 1. What are oil-fired boilers? This oil-fired boiler A boiler, through which the oil is atomized fuel oil burners, and then mixed with air, in suspension a combustion apparatus for combustion in the furnace. Larger capacity fuel boilers, mostly use heavy, but the larger the viscosity of heavy oil must be preheated before combustion; if the capacity is small, is the use of light oil, no need for preheat. In addition, oil-fired boilers for industrial use, mostly fueled with the use of light diesel oil. 2. whether the oil-fired boiler combustion and control system can be automated? The issue from a professional point of view, the answer is you can, that is, oil-fired boiler burning automation and control systems can be used. In addition, this kind of boiler fuel needs to be injected into the boiler furnace combustion chamber and the use of fire, there is no need to use grates facilities. Fuel oil-fired boiler does not produce ash after combustion, therefore, do not need to slagging facilities. 3. Does the oil-fired boiler have different classification criteria? It corresponds to the specific types of what? This kind of boiler oil-fired boiler, which is a different classification criteria, and correspond to different species at different classification criteria. If the fuel according to the type can be divided into two heavy gas oil boilers and boiler, light oil and kerosene are those diesel, heavy oil refers to crude oil after extraction remaining heavy gasoline or diesel oil. If use according to points, can be divided into a fuel oil-fired boiler china water boilers, hot water boiler fuel, heating fuel boiler, oil bath boilers and steam boiler fuel these. 4. whether the oil-fired boiler can be automatic oil burner? Why have their fuel tanks? On oil-fired boilers, can be automated using the oil burner, the ignition from the normal combustion, the air supply from the oil supply to the flame detector, and so can be automatic protection automatically, without manual operation. And this kind of boiler installed on the tank, one can play a role in filtering sediment, and second, to solve this problem come from oil-absorbing far away.

Wenzhou City, Zhejiang Province, is one of the countries and determined implementation of the regional focus of the Battle of Blue Sky. In order to improve air quality in the city of Wenzhou, improve people's livelihood well-being, for the governance of air pollution, Wenzhou City, developed and introduced the "winning Blue Sky Battle action plan" (hereinafter referred to as "embodiment"), give the city the power to defend "Wenzhou blue." Program 2020, in Wenzhou PM2.5 average concentration is maintained at 35 micrograms / cubic meter (city maintained at 31 micrograms / cubic meter), air quality control over the ratio of the number of days of 90% (93% city control ), severe weather and pollution more effectively controlled.

"Plan" also lists the specific implementation timetable: by 2020, the basic completion of provincial trunk pipeline construction, the basic realization of natural gas every county, the city's natural gas consumption amounted to 570 million cubic meters. In principle, to new natural gas cogeneration and gas chemical projects. By 2020, the city's total coal consumption decreased by 5% compared with 2015, accounting for the proportion of total energy consumption fell to 42.8% or less.

There are several types of "big coal" will be gradually phased out, including environmental protection, energy, security and other non-compliance of 300,000 kilowatts coal-fired units, 10 steam tons / hour and tea furnace coal-fired boilers, around the built-up area , operating a stove, grain storage and drying equipment, coal-fired facilities, more than 10 steam tons / hour and 35 steam tons / hour of coal-fired boilers. Before the end of 2020, 300,000 kilowatts and above thermoelectric coal-fired boilers and small coal-fired thermoelectric backward within the range of 15 km radius of the heating and power plants all closed down integration.

Stoke coal-fired hot china water boiler operating temperature range of its coal-fired hot water boiler, which operate in Stoke on what specific requirements will be? Its internal plumbing, how much temperature is generally able to withstand? And coal-fired hot water boiler hot water, whether it is secondary energy? These are associated with coal-fired boilers hot water boiler, so the following to explain the good answer, I hope that everyone in to get what you want. 1. Stokes fired hot water boiler operating requirements (1) before Stoke, first baffle opening smoke wind boiler, let the natural ventilation, the time is about 10 minutes. If mechanical ventilation is employed, then over time, for about 5 minutes. In this manner, the boiler furnace and combustible flue gas remaining in the exhaust clean. (2) For the boiler fire, it is strictly prohibited the use of volatile oils, to avoid problems. For Stoke-speed coal-fired hot water boiler, attention can not be too fast, in general, is not less than half an hour. Also, before Stoke, should open the circulating pump, so the job. 2. coal-fired hot water boiler interior water pipes, on the temperature, how many can afford to live? For coal-fired hot water boiler pipes inside this kind of boiler, it could afford, in general, hundreds or thousands of degrees is no problem. And it's also related to the boiler pressure. If the pressure is higher, the higher the temperature in the boiler furnace, so that the internal water circulation faster. 3. coal-fired hot water boiler, hot water, whether it is secondary energy? Coal-fired hot water boiler hot water, which belongs to secondary energy. This is because the secondary energy, which can also be called secondary energy, or artificial energy, primary energy is converted to a processed or derived, such as gas, coke, gasoline, heavy oil and steam and hot water. So, the question, the answer is yes. For coal-fired hot water boiler, the question raised above, as well as specific answers given, so that everyone can be a comprehensive knowledge and understanding of this kind of boiler, so as to carry out well the practical application of their work, and add some expertise. Furthermore, the use of effects and use value of the product to be improved.

To enhance the thermal efficiency gas boilers What environmental policy: the combustion efficiency of combustion represents the degree of complete combustion. To improve the combustion efficiency of gas boilers and environmental protection, we must try to adjust the combustion conditions and better organization of the furnace, fuel combustion, reducing q3 and q4. Gas boiler environmental protection reduce exhaust gas temperature: at present China's industrial boiler flue gas temperature is high, is one of the main reasons of the low gas boiler thermal efficiency and environmental protection. Each small boiler flue gas temperature decreased 15-20 ° C, 15 ° C decreased every large boiler, a 1% increase in the thermal efficiency of the boiler gas. Accordingly, to try to reduce exhaust gas temperature flue gas heat recovery, reducing heat losses q2, the fuel savings. Softened water supply and condensate recovery: boiler feed water softening treatment and condensate recovery measures is to improve the thermal efficiency of the boiler. Raw water contains various impurities and fouling material, if not the water treatment boiler fouling. Low thermal conductivity of the scale, so that once the heating surface fouling due to increased thermal resistance, gas boiler output decreased to increase coal consumption, reducing the thermal efficiency of the boiler. Boiler keeps running at rated load: When natural gas boiler overload, due to the amount of fuel to be increased, the coal seam thickened, grate speed, air volume must be increased to meet the increased load required. Thick coal seam and grate faster incomplete combustion of the solid increase in losses due to increased air volume, the short residence time in the furnace flue gas, some burning of combustible gas has not finished on the drain with the flue gas, so incomplete combustion gas heat loss is increased. Meanwhile, when the overload operation, since the furnace temperature is increased thickening seam, exhaust gas temperature increase accordingly, so that heat loss is increased. Boiler low load operation, the amount of reducing gas, the furnace temperature is lowered, deterioration of the combustion conditions, incomplete combustion loss q3, q4 is also increased. When the boiler load is only 50%, due to a significant reduction in temperature in the furnace, it is difficult to maintain stable combustion furnace. Low load operation relatively increased heat loss, the overload or low-load operation the boiler will result in reduced thermal efficiency of the boiler. Strengthen the insulation, sealing, anti-leakage, anti-risk: Due to the wall gas boiler, soda temperature heat pipe system is better than the boiler room air temperature is high, so that part of the heat pipe system and soda furnace wall to radiation and convection to the loss of ambient air, heat radiation loss becomes the boiler. Only the furnace heat of the heat loss, reduces the temperature of the furnace at the same time, it affects the combustion. Therefore, the use of advanced insulation materials to strengthen the walls and heat insulation boiler pipes, reducing heat loss and improve the thermal efficiency of gas boilers and environmental protection. Temperature and security issues to resolve gas steam boiler