Dealer Gas or Oil fired boiler Commercial Maldives

1, the safety valve should be mounted vertically in a high position in the pot business, set box.

2, between the safety valve and the drum or header, not equipped with access to the steam outlet pipe and the valve.

3, the lever-type safety valve should prevent movement of the self-apparatus and the weight limit leverage deviant guide tube, a spring safety valve should lift and handle means for preventing movement of the adjustment screw is screwed lightly.

4, the rated steam pressure less than or equal to 3.82MPa gas steam boiler safety valve throat diameter of not less than 25mm; power greater than the rated steam pressure 3.82MPa boiler safety valve throat diameter not less than 20mm.

5, the safety valve and coal-fired steam boiler tubes, the cross-sectional area not less than the cross-sectional area of ​​the valve inlet. If several valves installed together with a short tube directly connected to the drum, the cross-sectional area of ​​the passage should not step short tube to 1.25 times the area of ​​all the exhaust valve.

6, the safety valve should normally be installed exhaust pipe, exhaust pipe should be through a safe place, and there is sufficient cross-sectional area to ensure the smooth flow of exhaust.

7, the safety valve exhaust pipe at the bottom should have received a place of safety posturing of drainage pipe, the exhaust pipe and drainage pipe not allow the installation of the valve.

8, rated evaporation to 0.5t h coal-fired steam boiler /, at least two safety valves installed; Rated evaporation 0.5t h less than or equal to electric boiler /, mounted on at least a safety valve.

So now some corporate buyers, might face the problem of dealer or oil fired boiler commercial maldives equipment selection and purchase of the equipment for such boilers choose when to go or should take into account the energy aspect of it, such as boiler plant, is the emergence of many different forms of energy, such as electric boiler equipment now, there is natural gas. And making choices, it should also take into account the current boiler equipment, in terms of security it is how, is not able to have a good operability and so on.

Fangkuai Group insists on using sophisticated equipment and technology to ensure operation accuracy, increase rigidity and surface finish, reduce wear, ensure excellent performance, and ensure stable and reliable manufacturing quality. It has a domestic Class A dealer or oil fired boiler commercial maldives manufacturing license issued by the General Administration of Quality Supervision, Inspection and Quarantine. It has been based on quality for many years and has obtained a number of authoritative quality certifications.

Compare the expansion tank furnace oil and energy consumption standard gas thermal oil: oil furnace oil furnace gas in this kind of, I believe we are not unfamiliar to it, because, in its website article, is related to the and there is a certain degree of accumulation of knowledge, so, based on this, the following may wish to continue their study and work, and then give you some learning content, so that you can make yourself a new harvest. 1. Gas oil furnace, we should know what their specific? A kind of gas oil furnace oil furnace, we should know the specific content of relevant knowledge, which is mainly has the following, are as follows: (1) this kind of thermal oil heaters, which operate on the installation is very simple and convenient as long as its upper and lower portions of the combustion chamber body closed can. Therefore, the installation of its cycle, not very long. (2) Since the heating surface is the use of a disc which tube, but is a close-packed, so that in the use of the HTF, the factor of safety can be greatly improved. (3) combustion within the combustion chamber, for adiabatic combustion, which allows burning adequately performed and at the same time, to improve the thermal efficiency of the dealer or oil fired boiler commercial maldives well.