Commercial Fully Automatic 2 ton coal boiler

At 15:31 on January afternoon 55 points, Zhangjiakou Municipal Publicity Department announced through the official micro-Bo: Zhangjiakou Shiqiao Eastern red floor Combibloc bath center for illegal use of obsolete coal-fired commercial fully automatic 2 ton coal boilers, boiler and furnace door ring gall bladder junction cracking, resulting in rapid ejection soda.

At present, the accident has killed two people were killed and two injured, the injured have been rushed to hospital.

Since the accident the suspect, the suspect has been controlled.

It was a painful stricken by the accident, the suspect illegal use of coal-fired boilers have been eliminated, resulting in four families forever pain.

As can be seen from the government over the country began to strictly limit the use of coal-fired boilers, coal-fired boilers in order to face a fate or modification or elimination of the unlawful use of coal-fired boilers have been eliminated but can cause great harm, the accident is a obvious example.

Therefore, actively cooperate with the investigation of the relevant units of boilers, boiler out of strict compliance with the Code and running, grasp the safe operation of the boiler to a large extent, reduce the occurrence of such tragic accidents.

Advantages of heating Boiler and Gas-fired heating BoilerOil-fired and gas-fired heating commercial fully automatic 2 ton coal boilers all belong to chamber-fired boilers. The fuels used are injected into the furnace by burners and no cinder will be produced after combustion. This type of heating boiler does not require the complex and huge crushing of coal-fired boilers, facilities for conveying tender coal and equipment for burning and dedusting, so it is compact in structure, small in size, light in weight, small in land area, small in pollution and high in automation. Cities and boiler houses that require high environmental protection and prohibit the use of coal-fired boilers are used in large quantities in areas and units with high technical requirements for heating regulation. Medium and small boilers generally use light diesel oil, large-scale oil-fired boilers burn more heavy oil. Due to combustion The boiling point of oil is always lower than its ignition point, so the fuel is usually gaseous. After heating, the fuel is vaporized into oil vapor. After the mixture with air reaches a certain temperature, it starts to ignite and burn. In order to enhance the degree of vaporization of fuel, the fuel is often atomized into small droplets into a man-made furnace, heated by high-temperature flue gas in the furnace, and quickly vaporized and mixed with oxygen in the surrounding air, starting to ignite and burn. Some of the heat after burning is passed to the oil droplets, which vaporize and burn until they are exhausted.

How to pick the price of the commercial fully automatic 2 ton coal boiler heating boiler? 1, the first choice for the required heating area, probably determine the tonnage. Tonnage is too small will cause the price of the boiler heating can not meet the demand, the tonnage might cause the boiler to increase economic costs, reduce the thermal efficiency of the boiler. General on housing construction in northern concerned, one ton of heating boilers 6000 level, but also by the housing structure and the heating temperature. 2, determining the pressure heating boiler temperature. Pressure and temperature are the basic parameters of the boiler, to determine these points to your boiler is more clear. 3, to determine the material heating boiler. Today, coal-fired boilers have received a lot of national policy restrictions, you need to know your local ban on coal policy. If you are not good enough coal-fired boiler, you can consider natural gas, biogas, biomass fuels, such as methanol, which are a popular choice for customers.

In modern industrial production, the commercial fully automatic 2 ton coal boiler plays a very important role, but it is also easy to scale or suffer corrosion damage. Therefore, boiler heaters need to clean the relevant boiler equipment in time under this condition, in which the non-cleaning agent which has the most outstanding performance and practical effect is the non-cleaning agent. When the heating system is replaced, cleaning agent must be used to clean the pipe to eliminate the inner wall debris so as not to affect the heat transfer efficiency and service life. In use, it should be carefully checked, water-proof, acid, alkali and low boiling point leakage into the use system, and add a filter device to prevent mechanical debris into the system, to ensure that the oil is pure. Degree According to the requirements of the grade and the heat use process, all kinds of high temperature brands are selected correctly, and the regulations of the Safety Technical Supervision rules for Organic Heat Carrier Furnace are strictly complied with, and they are used correctly. The high temperature of boiler is suitable for heating equipment such as coal burning, gas, fuel oil heating furnace as carrier, electric heating reaction kettle and other heating equipment, such as expansion tank, oil storage tank, other safety components and temperature control instrument, etc., so as to ensure safe operation. The purpose of the boiler cleaning agent is to quickly remove the dirt and carbon accumulated in the internal pipes and heat exchangers of the boiler. Then we also have requirements for cleaning agents. We must not harm our metals. Heat transfer surface, requires no residue, complete dissolution, and must be easy to operate, as long as ordinary personnel in accordance with the use of procedures on the operation. The requirements of our Fangkuai boiler for boiler cleaning agent are: low energy environmental protection, five poisons odorless, non-flammable, small irritability, can be discharged directly after cleaning.