4t gas boiler Factory Direct Supply Armenia

Coal-fired 4t boiler factory direct supply armenias to gas boilers benefits and precautions With the rapid development of national energy-saving environmental protection, the traditional coal-fired boiler can not meet the needs of the times. Therefore, the coal-fired boiler biomass boiler or gas boiler has become in many boiler user's choice. Before the transformation, to understand the difference between .1 and gas boiler fired boiler. Circulating fluidized bed combustion boiler fired by coal crushing device fluidized combustion process, the coal by crushing device percutaneously into the bunker through a the spreading coal coal injecting air into the furnace; circulating ash by heating, fluidized combustion process. When the coal into a gas fuel is injected directly into the combustor for combustion. 2. Combustion of Coal is mainly composed of C, H, O, N, S, ash and moisture and other elements. Generated when coal SO2, SO3, NOx ash and moisture, and SO2, SO3, NOx from flue gas emitted into the atmosphere, pollute the environment and cause harm to humans. The main components of the exhaust gas and coke are CO and H2. The main produce CO2 and H2 post-combustion, much lower than coal-fired boiler SO2, SO3 and NOX emissions. 3. Ventilation pressurized combustion coal combustion boiler used in a combustion mode. The bottom of the combustion process through the induced draft fan with fan and completed. In the combustion of coal, it requires a lot of air. Gas under a slight positive pressure in the boiler or burner slightly negative pressure, which requires less airflow. Burner air may be pre-mixed with natural gas. 4. coal boiler control reasons, material thickness, amount of wind, the wind volume, wind and other than coal, coal-fired boiler is difficult to automatically adjust the operating parameters of the boiler according to the load. However, fewer factors gas boiler, the burner valve can be adjusted according to the size of the load, easy to implement automatic control. Coal-fired boiler to a gas boiler Notes: Main results are as follows: (1) small boiler, the coal-fired boiler to a gas boiler, i.e. the negative pressure of combustion from the original to the current combustion slight positive pressure, and must pay attention to the furnace wall structure sealing problems. Closely related (2) selection and arrangement of the burner and furnace, the degree of filling of the flame in the furnace is preferably not formed dead air, to avoid the interference of adjacent flame burners, to avoid interference from adjacent burner flame. Unburned gas - air mixture should not be in contact with a heated surface, in order to avoid incomplete combustion. Gas combustion. Gas burner arrangement disposed conduit and ducts should be considered reasonable gas pipe and duct arrangement, ease of operation, inspection and maintenance. (3) the transformation of coal-fired boilers is mechanized layered gas boiler should be removed before the arch and the arch, and the bottom heating surface increases, in place of the grate, the grate to prevent overheating. Gas Velocity (4) on heat transfer surface of the fly ash is not restricted abrasion conditions, convection heating surface heat transfer coefficient is increased, increasing the pressure in the boiler where H is unduly increased. Boiler erosion surface. At this time, the capacity of the boiler should be noted that the steam separator to ensure the quality of the steam.

6 ton industrial wood fired steam 4t boiler factory direct supply armenia features:

1. Furnace and the two sides of burner zone adopts membrane water-cooled furnace structure. The membrane structure of wood fired steam boiler, our company’s solely design once used in electric boiler , is now applied in shaped assemble boiler. Its advantages lie in great thermal transmission heat, better heat transfer effect, lower heat loss ,better air impermeability, no wall distortion and no ash leakage.

2. The structure of arches adopts the newest technology --the upside”a” technology, which is awarded the national science and technology prize. The front arch is high and short while the back arch is low and long. And the part near the exit is inverse inclined type,while the front arch is 45ºinclined type, they together form a downside a flame structure,which makes the lean coal combustion easier and it can adjust itself to a wide rang of coal types. In this way, the flue gas is kept within the furnace a longer time, and the combustion efficiency is higher. The streamline shaped back arch can throw the non-burned carbon grains in the middle and back part of furnace to the front, so that the coal can be easier to be ignited and the ignition lines are tide.

3. The wood fired steam boiler adopts double layers or single layer layout structure, which can meet the customers’ requirements better.

Gas oil furnace pump selection and purchase points to consider: conducting oil furnace oil furnace gas this kind, because it is one of the website product, so the knowledge and understanding of the product, at least, should achieve a comprehensive and specifically this level, so as to learn to have a good effect. Moreover, this is the basic requirement, so the following, it is better to proceed immediately, thereby, improve our learning efficiency .1. Gas oil furnace, the use of the pump, what good measure? Gas oil furnace on the 4t boiler factory direct supply armenia, a pump energy saving, the pump energy is recommended to use four, because it can be recycled flue gas temperature. Further, on the main circulating pump, the flow rate can be appropriately increased, thereby improving the heat exchange efficiency inside the boiler, in turn, to achieve air and save energy both goals. 2. The expansion tank of gas conducting oil furnace, the oil level is much more appropriate? In addition, its purchase, to pay attention to what? Gas oil furnace in the expansion tank, the appropriate oil level, is two-thirds the height of the expansion tank, and, to ensure that overflow does not occur the problem. And the purchase of products, in general, is to consider the use area, manufacturers and service qualification, and the use of these requirements and the environment. Through them, to choose the right products.

There are a few big happy event in life, conclude, than the following: drought every winter rains, foreign land refresher, the wedding night, pass the examination, as well as being hit Awards. In March this year, planned by the fast Boiler Group hosted the second session of the 4t boiler factory direct supply armenia room] [best photo contest Huobian country! Fans actively participate in activities perfect ending. Gain a lot of excellent photographs, the Group established a review panel for the competition each photo a rigorous review, and ultimately selected a first prize, two second prize, third prize 3. In addition, the panel of judges based on the results of online voting to elect Choice Award six.