6 ton Natural Gas boiler Commercial Price Kuwait

Problematic fired 6 ton boiler commercial price kuwait (1) Henan small boiler gas boiler should be noted, by the Henan coal into gas boiler, i.e. the original becomes a negative pressure is now slightly positive pressure combustion burner, the furnace must be noted that the structure and the sealing wall problem; (2) prevent explosion of the furnace, a gas fired boiler furnace to Henan, when defective or incomplete combustion of fuel atomization gas in the furnace or heating surface of the end aggregate, fire or explosion occurs, and therefore, in appropriate sites shall boiler explosion vent means, while the control program should be added to the ignition and flame protection device of automatic control, to ensure safe operation of the boiler; (3) the selection and arrangement of the burner close to the furnace in the form of, should the flame in the furnace better fullness without forming dead air; adjacent flame of the burner to avoid mutual interference; low load flame holding in the furnace central position, offset from the center of the furnace to avoid the flame center of symmetry; unburned gas-air mixture is not in contact with the heated surface , to avoid the formation of incomplete combustion gases; hot flame to avoid high-speed heating surface erosion, in order to avoid excessive heating surface so that the wall strength of overheating. Burner arrangement also consider the gas pipe and duct arrangement, easy to operate, inspection and maintenance; (4) Mechanized layered coal-fired boiler, gas boiler to change Henan, first removing its longitudinal arch, taking into account the increase in the bottom heating surface to replace the grate, grate to prevent overheating burn; (5) gas velocity Henan convection heating surface is not limited by the gas boiler ash abrasion conditions, gas velocity can be increased properly, so the convection heat transfer heating surface coefficient increases, without increasing the heating surface of the boiler, can increase the pressure of the boiler, steam-water separation capability should be noted that at this time means the pot to ensure the quality of steam, hot air for the boiler had particularly important.

Select the first steam 6 ton boiler commercial price kuwait to know what parameters? Steam boilers have the following main parameters: 1, Rated evaporation Rated evaporation is power steam boiler, steam boiler is the most important parameter, usually expressed in tons evaporation, that is, we usually say how many tons of boiler. 2, rated steam pressure rated steam pressure means that the steam pressure generated in the steam boiler, generally expressed in MPa or kg. 1MPa is 10 kg, like laundry, all hospitals, factories and the like conventional steam occasions the general use of low-pressure steam 1.0MPa or less. Only when using steam as a power to require the use of high-pressure steam. 3, where the steam temperature of said steam temperature, refers to the temperature of saturated steam. Saturated steam pressure and steam temperature are corresponding. Temperature of saturated steam at a pressure of 1MPa 184 ℃. 4, gas / oil / coal consumption fuel consumption is an important indicator of concern when choosing a steam boiler, which is directly related to the use of the running cost of the boiler. In the operation of the boiler, the fuel cost is very impressive, if just considering the purchase cost of buying a cheap but high energy boiler, which led to the late high operating costs, certain that it will be wasted. 5, the thermal efficiency of fuel consumption with the boiler thermal efficiency of boilers is inversely proportional. The higher thermal efficiency, lower fuel consumption of the boiler. Boiler thermal efficiency expressed as a percentage, the value is a more intuitive. 6, the boiler operating weight, size or location in the election of the steam boiler, it should find the place whether the load per unit area can withstand the weight of the steam boiler, and if there is enough space to place the steam boiler maintenance and reserve space.

Shandong Zhaoyuan Mining Group Co., Ltd. is a large state-owned local asset management companies, gold mining dressing and smelting for leading industries, operates in the area of ​​tourism, services, precious metals, real estate, eco-agriculture, with total assets of 10.2 billion yuan, Shanghai gold Exchange is an international provider of standard gold bullion. July 2017, Shandong Mining Group and fast 6 ton boiler commercial price kuwait steam signed a 0.5-ton electric heating steam boiler which mainly produce steam for metallurgical mineral processing and other manufacturing processes, energy defeating small, strong ability to supply steam .

Four combustion modes of 6 ton boiler commercial price kuwaitBoiler as an energy conversion equipment, plays a very important role in industrial production, can be said to be the core main force of production enterprises. I know the boiler, but it is estimated that most people do not know much about the combustion mode of the boiler. Today, our Fangkuai Boiler will take you to understand the four combustion modes of the boiler. It can be divided into suspended combustion, boiling combustion, layered combustion and gasification combustion. The following is one by one. First, suspension combustion, also known as fire chamber combustion, is a combustion mode in which fuel is injected into the furnace with air in the form of fog, powder or gas. Suspension combustion ignition is rapid, combustion heat The efficiency is high. It is easy to realize automatic operation. The adaptability to load variation is strong. And the adaptability to the fuel is also strong. However, this combustion mode requires a high level of operation, and should not run intermittently. Secondly, boiling combustion is a kind of fluidized boiling combustion of fuel in fluidized bed under the action of appropriate velocity of air. Boiling combustion is suitable for all kinds of coal, especially inferior coal, such as coal gangue. Stone coal, and so on, this combustion mode on the size of coal particles also have certain requirements. The coal mass must be processed and broken into particles with an average diameter less than 10mm during combustion. Delivered by coal-feeding equipment Enter the furnace. Third, layered combustion, also known as fire bed combustion, is a way of burning fuel in a certain thickness on the grate. This combustion mode is only suitable for solid fuels. However, there are certain requirements for particle size (6~50mm). Layered combustion can basically adapt to solid fuel. As long as the mixture of air and fuel layer is good, and there is a certain combustion temperature, the ideal combustion can be achieved. If the air and fuel layer do not mix well, or the local air supply is insufficient, the combustion will be incomplete and the combustion efficiency will be low. This type of combustion is generally used in chain furnaces. IV. Gasification combustion Gasification combustion mainly refers to gasification and direct combustion of coal put into furnace, and this combustion mode is not suitable for coal with low ash content. High-temperature gasification and staged combustion is different from ordinary gasification combustion. Its utilization principle is as follows: under the condition of oxygen, the fuel surface is heated with high-temperature heat source above 800 ℃, so that the fuel can be rapidly pyrolysis and gasification combustion from outside to inside. Part of the high temperature produced by combustion is then gasified at high temperature, and part of the fuel is discharged for work, thus forming a continuous high temperature gasification combustion reaction.