oil gas fired Vacuum Boiler Dealer in Antarctica

In recent years, with the development of science and technology, sterilization equipment has been continuously updated. Pulse vacuum pressure cooker has replaced the lower exhaust pressure cooker. An electric steam oil fired vacuum boiler dealer in antarctica replaces an old-fashioned boiler where coal burns to produce steam. The electric steam boiler equipment has many advantages, but the performance has also changed. In order to ensure the safe use of the equipment and prolong the service life of the equipment, some experiences have been accumulated in the correct installation and commissioning of the equipment after several years of research. When the steam boiler leaves the factory, the staff shall carefully check whether the physical items are in full conformity with the list details, and must ensure the integrity of the equipment. After delivery to the installation environment Equipment and components need to be placed on a flat and spacious floor to avoid damage to brackets and pipe seats. There is also a very important point is that after fixing the electric steam boiler, carefully check the boiler and the base contact place whether there is a gap, to ensure that the tight seam, there are gaps should be filled with cement and so on. At the time of installation, the most important component is the electrical control cabinet, need to connect all the wires in the control cabinet to each motor, then install it. There is still a series of commissioning work to be done before the steam boiler is put into operation. The key two steps are liter. Fire and gas supply. It is necessary to control the temperature strictly and not to increase the ground too fast in order to avoid the non-uniform heating of every component and affect the service life of the boiler after the boiler has no loopholes in the equipment. The temperature of the boiler should be strictly controlled during the process of fire-raising and the temperature should not be increased too fast. At the beginning of the gas supply, the heating operation should be carried out first, that is to say, the steam valve should be slightly opened, allowing a small amount of steam to enter, playing the effect of preheating the heating pipe, and paying attention to the normal operation of each component at the same time. After these steps, the steam boiler can be used normally.

What are the advantages of vacuum oil fired vacuum boiler dealer in antarcticas?

Because the inside of the furnace is a vacuum, the heat medium condenses onto the heat exchanger after it is heated and evaporated, so the heating medium is no more than the heating medium in the process of use. At the same time, it is more energy-saving and environmental-friendly than other types of boilers. Do you know what are the main advantages of the most reliable vacuum boiler? Here is a brief introduction to the advantages of vacuum boilers.

1, high efficiency and energy saving because the vacuum negative pressure hot water technology is used in the production design of the vacuum boiler, so it can make the boiler run in the vacuum state, and its boiling point is low, and it can carry on the latent heat exchange of vaporization (condensation latent heat). And using the three-way wet back design, the heat transfer performance is good and can effectively improve the radiation and convection heat transfer area, so it is more efficient and energy-saving.

2, multi-purpose because vacuum boilers are not only divided into vertical, horizontal, fuel and gas and many other models that are freely available to the user, but also because its heat exchanger and header are a separate state. Therefore, the load of heating water and hot water can be switched at any time according to the actual needs, which can fully meet the different requirements of users for heating water and clean hot water, and ensure that hot water is clean and stable so as to realize multi-use of one machine.

3, the installation is simple because the vacuum boiler is manufactured with modular design and high-performance heat transfer components, so the unit size of the boiler is smaller. It is not only convenient for transportation and storage, but also simpler and more convenient in installation method. In addition, it can also be conveniently installed in a small space or can be used in parallel operation of multiple units according to the actual needs. These three parts are the main advantages of vacuum boilers.

July 26, 2016, Beijing, China Everbright Paper Co., Ltd. and the company signed a "split 6 tons of steam condensing gas steam oil fired vacuum boiler dealer in antarctica contract" by the company responsible for the WNS6-1.25-YQ split condensing gas boiler steam to all production, installation and commissioning work. The product is the use of condensing technology, effective emission of harmful substances SOx, NOx, COx, is industrial boilers efficient and environmentally friendly solutions.

Comparison of oil fired vacuum boiler dealer in antarctica failure rate and safety between boiler failure rate: 1, degree of vacuum in the vacuum boiler furnace boiler * important indicator of stable stable operation of the four main factors often influence the degree of vacuum: 1) boiler and valves, The instrument has no leak points, including the inlet valve and instrument currently can not guarantee no leakage occurs within 3 years. 2) whether the control section failure, the boiler controller and negative pressure controller also fails in operation is inevitable, such as the failure rate even higher internal controller 3) a vacuum pump, if the three-way electromagnetic valve normal, due to the vacuum pump, three-way solenoid valve is not run frequently, imported and seizure operation also prone to failure. 4) Load not have mutations, altered boiler load is normal to the boiler, the boiler can meet generally 30% -100% of the load adjustment. Above failure will cause the boiler to change the degree of vacuum, should check the airtightness of the boiler, the control section is normal, the vacuum pump, the three-way solenoid valve is normal, check load changes, if the check is normal and negative pressure controller setting, after everything is normal vacuum level recovery boiler can also normal use, or to repair a comprehensive inspection shutdown. The actual operation of the vacuum boiler breakdown maintenance rate is higher than the pressurized steam boiler, a steam boiler control requirements than. 2, pressure boilers including a boiler only basic time, temperature, level control, controller selects imported hot water boiler, as compared to a lower failure rate. No need to maintain the degree of vacuum control equipment, no complicated control equipment, personnel operating requirements simpler than vacuum boiler, the less chance down for maintenance, the actual running hot water boiler to be much more stable. Compare the safety of boiler: 1, vacuum boiler if for the above four factors the degree of vacuum boiler is not guaranteed, it may cause a rapid rise in boiler pressure, boiler is a closed structure, if careless operator, it is possible to be there dangerous pressure steam boiler, vacuum boilers run more negative safety is based on the premise degree of vacuum boiler must not be problems. 2, atmospheric pressure hot water boiler boiler-through the atmosphere, as simple as boiling water, any failure will not cause pressurized boiler, boiler more secure, truly without any danger.