10t boiler For Sale Nepal

Boiler water treatment industry specific purpose of which: The purpose of 10t boiler for sale nepal water treatment industry has a specific purpose which boiler water treatment industry specific industrial boiler water which generally comes from groundwater or directly use tap water. Even if they look clean, but in fact contains a lot of impurities, boiler work easily lead to a lot of scale generated, affecting the thermal conductivity of the boiler, at the same time have a corrosive effect on metal structures of the boiler, boiler operation hazards. The main purpose of the timely processing of industrial boiler water is to reduce the harm of harmful impurities in the water or scale. The water quality has a direct impact on the work of the boiler. Fouling will result in thermally conductive boiler difference, steel contrast boilers, thermal conductivities only 1%, will seriously affect the thermal conductivity of the boiler, therefore, to raise the temperature of the boiler inner walls to protect evaporation, addition, it should increase blast volume boiler and the amount of coal feed, to enhance the exhaust heat consuming process, which can not be fully carbon coal combustion, combustion in the boiler will not significantly reduce the thermal efficiency.

Recently, Luoyang City, Henan Province, pollution prevention campaign of the leading group issued a document required to carry out the transformation of low nitrogen gas 10t boiler for sale nepal. Specific content: 10 before the end of the year, within the city steam 4 tons / hour and a gas boiler, and above all the installation of direct-fired burners low nitrogen, 3.5% oxygen in the transformation reference, more than 75% boiler load condition next, particulate matter, sulfur dioxide, nitrogen oxides emission concentration not higher than 5 mg / m, 10 mg / m, 50 mg / m. To complete the transformation of nitrogen oxide emissions monitoring, to wriggle out of the gas boiler outage low nitrogen transformation. After the new gas boiler should be installed low nitrogen burners.

Through the trial operation, the installation quality of the 10t boiler for sale nepal, auxiliary machine, control system and other equipment can be checked; the inner surface of the pipeline is clean and there is no debris in the pipeline; the operating characteristics of the boiler and main auxiliary equipment are preliminarily understood; the boiler control system and protection system are inspected. Rationality and reliability; preliminary inspection of boiler and auxiliary equipment full-load operation capability; discovery of important defects in boilers and auxiliary machines, so as to take effective measures in a timely manner; also training relevant operators to understand and operate equipment performance The initial adjustments laid the foundation for pilot production and commercial operations.

Plywood is a building material consisting of veneers (thin wood layers or plies) bonded with an adhesive. The manufacture of softwood or hardwood plywood consists of nine main processes: log storage, log debarking and bucking, heating the logs, peeling the logs into veneers, drying the veneers, gluing the veneers together, pressing the veneers in a hot press, plywood cutting, and other finishing processes such as sanding. Plywood production needs use steam at the plant. In the drying process of wood, a dryer is used. The heat source of the dryer is usually 0.4-1.2 MPa saturated steam, the saturated steam heats the air to 120-140 ° C, and the hot air is used to dry the wood raw material. The logs (now referred to as blocks) need be heated to improve the cutting action of the veneer lathe or slicer. Blocks are heated to around 93°C (200°F) using a variety of methods--hot water baths, steam heat, hot water spray, or a combination of the three. We could provides 2-120 ton/hr steam 10t boiler for sale nepal for plywood production.