1t Natural Gas boiler Manufacturers Energy Saving Malaysia

Differences in the functions of different types of gas-fired 1t boiler manufacturers energy saving malaysias

Each boiler uses different fuels, some burning with coal, some with fuel or gas, some with electricity, and some with coal-water slurry as the raw material for combustion.

Problems coal 1t boiler manufacturers energy saving malaysia gas boiler gas coal problems are: 1, more coal ash, 2, unevenness of coal particles, 3, coal contains a large amount of impurities, 4, a lower heating value of coal, 5 when combustion is not easy to ignite fire, 6, coal moisture content uncertain. 7, does not burn coal, slag high carbon content. In general, use is preferably designed coal boiler design coal or coal close, in order to ensure stable combustion. In recent years due to the growing tension surrounding the coal supply, coal supply has become diversified, coal quality is very different than before coal, have a great impact on the stability of the boiler combustion and normal heating operation. Impact of coal combustion boiler stable for: calorific value of coal is coal reflects an important indicator of good or bad, when the low calorific value of coal to a certain value, will not only affect the incomplete combustion instability and can lead boiler flameout, the outlet temperature of the boiler is difficult to compliance, affecting the normal operation. Volatile combustion and can be deposited at lower temperatures, as the combustion heat, the temperature rapidly increased coke particles, provide an extremely favorable conditions for ignition and combustion, volatiles further increased coke deposition and internal voids and the external reaction area, will help improve the speed of burning coke. Thus, the greater the content of volatile, nonflammable, the less fixed carbon in the coal component, the easier coal burning ember, devolatilization of many voids, increases the surface area of ​​the reaction, the combustion reaction is accelerated. When the volatile content is reduced, pulverized coal ignition temperature significantly increased, the hot increases, difficult fire, ignition time required becomes longer, the combustion stability is reduced, shifting the center of the flame, furnace absorbed radiation heating surface reduce heat, increase the heat absorption of the convection heating surface, the rear exhaust temperature, exhaust loss increases.

The 4ton biomass steam 1t boiler manufacturers energy saving malaysia is specifically designed to use biomass pellets as fuel. Installed at Vietnam, a tobacco processing facility, the boiler reduces the use of fossil gas. Operating at 16 bar pressure, the boiler has a nominal capacity of 4 ton per hour of dry, saturated steam.

The partnership, fast 1t boiler manufacturers energy saving malaysia for the user responsible attitude to have left a deep impression on our fireman boiler operation is not very skilled, fast deliberately sent a party of professional and technical personnel for our on-site supervision of installation, commissioning and training to ensure that the latter can operate our good boiler fireman. --customer feedback