1 ton coal steam boiler Commercial Cheap Turkey

What are the methods to reduce pollution mill 1, check for leakage protection and maintenance of: 2 mm steam leakage will cause energy losses of more than 10 tons of coal each year do? When you do not use it, you can turn it off to save energy. For water, steam and compressed air leak survey and routine maintenance, cost very little. 2, the non-contact cooling water in repeated use: Since the non-contact cooling water temperature and the quality is very good, it can be reused for desizing, scouring, rinsing and other processes. Three best source of cooling water is regenerated: sintering machine, a pre-link and compressor systems. The plant water recovery system may be installed, pipes, valves, storage tanks, and control systems. 3, repeated use of steam condensate: Textile mills require large amounts of saturated water vapor in the dyeing process, wherein a portion of the condensate is converted to its high temperature and purity. Water can be pumped back to the boiler to form a new steam. For those who buy steam from suppliers, or boiler is located away from the dyeing process, the condensate can be used as water washing or desizing. 4, pre-treated wastewater reuse Procedure collected bleaching, mercerizing machine, the water can be reused in other programs, there is no direct discharge of wastewater. 5, hot wash water is recovered from the hot gas in the dyeing process, large amounts of hot water are used to wash. Heat the washing water can be collected by the system plate heat exchanger to preheat the water to be sent to the next washing. 6, pre-screened coal enterprises should introduce screening spiral coal boiler technology to selection of raw materials. It is possible to improve the media tell the good, the bad quality of proportion, to avoid loss of small volumes of coal and coal calorific value. 7, maintaining steam traps traps can help maintain effective delivery of the steam plant. The valve is removed from the steam pipe and prevent further condensation water, so as to avoid heat loss and reduce fuel consumption. 8, the piping, valves and heat insulated flange experience pipes, valves and flanges waste of resources, reducing efficiency. Steam delivery device insulated to prevent vapor loss is an inexpensive, energy-saving method of .9, the heat recovery from the boiler chimney at a temperature of 360 ℃ smoking, sometimes discharged directly into the atmosphere, there is no heat recovery. In fact, this heat can be used to preheat boiler water, steam or create a new steam system. 10, optimization of compressed air systems consume a large amount of compressed air in many parts of textile machines Mills. These instruments are prone to leakage, particularly in a threaded joint, rubber joints, valves, automatic regulator, the inflatable device and the old gasket. In addition, the use of compressed air pressure is usually based on the maximum pressure setting; reduce this pressure is feasible and would not have any negative impact manufacturing.

Horizontal industrial boiler for sale in India

ZG horizontal industrial boiler range which can be exported to India: horizontal fire tube boiler, horizontal water tube boiler, horizontal coal fired boiler, gas fired boiler, oil fired boiler, biomass fired boiler and so on. These product are featured with stability, quality, durability and reliability because our product are manufactured with top quality raw materials. The design, construction and superintendence of a wide variety of steam boilers, hot water boilers, and power plant boiler.

Main contents of boiler energy efficiency test:

1. Boiler thermal efficiency test: a) determination of boiler evaporation; b) boiler excess air coefficient detection; c) exhaust smoke temperature detection; d) fuel combustion efficiency test; e) boiler thermal efficiency test; f) fuel consumption; g) Steam to coal ratio.

2. Boiler new product stereotyped energy efficiency test: Determine whether the boiler thermal performance indicators are consistent with the design and determine the operation mode of the equipment. Such as boiler evaporation, boiler thermal efficiency, combustion efficiency, various heat losses and so on.

3. Boiler operation adjustment test: Determine the most economical operation mode of the boiler and identify defects in the boiler operation. Such as boiler maximum load, boiler minimum load, fuel requirements, economic load, reasonable exhaust gas temperature, optimum wind coal ratio, excess air ratio, secondary air ratio and so on.

4. Comparative test of thermal performance before and after boiler reform: changes in evaporation, effects of combustion, thermal efficiency of boilers, etc.

5, fuel industry analysis, elemental analysis: to judge the quality of oil, gas and other fuels, easy for enterprises to control the quality of fuel into the plant.

6, water quality testing, scale analysis: determine the quality of water, control the boiler water indicators to prevent boiler fouling.

Due to the special nature of the industrial park location, we are more to consider whether the boiler with green features in the choice of boiler equipment. According to our survey of the entire boiler industry, quick side has considerable experience in research and development in the field of environmental cleaning boilers, boiler equipment while also providing low pollutant emissions for Beijing more enterprises and institutions, we are fully confident that the fast boiler ability. --customer feedback