Commercial Hot Selling boiler 1t Brunei

20 tons of gas steam commercial hot selling boiler 1t brunei introduce 20 tons of gas boiler can be divided into WNS and SZS natural gas steam boiler steam boiler. Selling models WNS20-1.25-Y (Q), SZS20-1.25-Q, SZS20-1.6-Y (Q). Applications: large-scale central heating, residents of the winter heating gas boiler 20 tons of gas consumption: 20 tons of gas boiler, for example, 20 tons of gas boiler power of 14MW, the heat value of fuel 35.53MJ / Nm3, Zheng pot production of gas calorific value boiler efficiency was between 92% to 90%. Then, 20 tons of gas boiler gas consumption is: 14MW * 3600s / 35.53MJ / Nm3 / 92% = 1541m3 / h. After 1,20 tons of gas steam boiler used for some time: it can be seen from the formula one ton gas-fired boiler air consumption is 1541m3 / h, then, x-ton ​​gas-fired boiler air consumption = x * 80m3 / boiler maintenance considerations can h , when the shutdown of the boiler should let the water out, especially in winter, if you do not turn on the water treatment, it is likely to frozen pipes and storage tanks, shortening the life of the boiler. 2, timely repair or replacement in order to prevent the boiler safety accessory is a security incident, required timing detection boiler safety accessories, such as a safety valve, water gauge, pressure gauge, etc., there is a problem. 3, when a boiler failure, the need for timely shutdown, and notify service personnel of the boiler manufacturer for professional maintenance, use and repair companies must not own, in order to avoid unnecessary losses. 4, boilers are generally mounted with sewage plant, the bottom of the boiler blowdown is very important in preventing flue gas condensation. Meanwhile, in order to prevent the boiler electrochemical corrosion, cathodic protection measures must be taken. 20 tons of gas boiler technical parameters: Furnace: SZS20-1.6-Q desired amount of steam: 20 tons of steam rated steam pressure: 1.6MPa rated steam temperature: 194 deg.] C water temperature: thermal efficiency of 104 ℃: 92% air consumption: 1450 kg applicable fuel: natural gas

Accident 2: pressure gauge malfunction.

Measures: stop boiler operation, close the table control valve, pressure gauge or replace cock. Cleaning or purge passage gauge, adjust the pointer to the correct position.

3 accidents: failure of a safety valve, steam leakage, over pressure on or below the rated pressure is on, and after the valve element does not exhaust back seat and so on.

fuel-fired commercial hot selling boiler 1t brunei maintenance methods

After buying oil-fired boilers, many enterprises pay no attention to the maintenance and maintenance of oil-fired boilers, as a result, the service life of oil-fired boilers is greatly reduced. So how should the fuel-fired boiler be maintained? The following article for you to do a detailed analysis. When the furnace water is cooled below 70 ℃, the inner dirt will be completely removed, washed clean, all the manhole, hand hole, pipeline valve and so on sealed tightly, and completely isolated from the running boiler with blind plate. After all the alkaline solution is added, the boiler is injected with soft water until the water comes out of the top of the boiler. After closing the feed valve, pay attention to the problem. Mixing average of alkaline solution in boiler.

Battle blue horn sounded, emissions of sulfur, nitrogen and oxygen compounds gradually strict national requirements. To improve the quality of the environment, but also the people a blue sky, in all industries around the environmentally friendly product revolution, Hainan Sinochem Pharmaceutical companies are no exception. By the company investigation and comparison of commercial hot selling boiler 1t brunei products, in March 2017 signed a six-ton ​​steam-cleaning integrated condensing gas boiler and steam fast boiler. Tested and post feedback, the boiler equipment installation qualification, operating normally, and successfully passed the inspection by local quality inspection departments of the boiler.