6t oil fired boiler Factory Price Industrial Bhutan

Recently, the Tianjin Beichen District issued a "Tianjin Beichen District in 2019 to win the Battle of Blue Sky battle plan" (hereinafter referred to as "Plan"). "Plan" put forward: to strictly control new coal projects, the implementation of coal consumption reduction project alternative, prohibit self-supporting construction of coal-fired power plants. Complete the transformation of low nitrogen gas-fired 6t fired boiler factory price industrial bhutan more than four before the end of September 2019.

Details are as follows.

1, reducing the total coal consumption in 2019, the region's total coal consumption and coal in primary energy requirements meet the relevant indicators. Strict control of new coal projects, the implementation of coal consumption reduction project alternative, prohibit self-supporting construction of coal-fired power plants.

2, ongoing heating, agricultural, industrial and commercial management of coal-fired boilers, coal-fired boilers to burn consolidate shut down rectification results to ensure that no rebound. Carry out special rectification coal, coal supervision prominence to the implementation of high-quality coal supply and security, supervision and management of coal enterprises to establish a purchase and sale accounting, prohibit the sale of low-quality coal does not meet the requirements of state and city, by increasing the sampling frequency, strengthen information disclosure, strict qualification management, according to the law firm did not check other means, to crack down on low-quality coal to maintain circulation, sale and use of high-pressure situation. Ongoing heating season heating companies burning coal quality inspection. Strictly implement the relevant requirements of the city, set up to ensure that the region is no longer operating coal storage space, strengthen supervision.

3, to promote the safe and orderly clean warm winter residents. The completion of the outer ring 23 000 residents in rural areas "coal to electricity," the task before the end of October 2019, the region's urban and rural residents to achieve bulk coal for heating, "cleared."

4, before the end of September 2019 to complete the transformation of more than four low-nitrogen gas boiler. The full implementation of leak detection and repair (LDAR) system. Ensure the region involving volatile organic compounds emissions from industrial enterprises and supporting environmental protection facilities full coverage, stable and meet the relevant emission standards.

The main components of organic heat 6t fired boiler factory price industrial bhutan burner natural gas burner 5 is constructed of the following system components: 1, the function that the air supply system, air supply system into the wind speed a certain amount of air to the combustion chamber, the main components are: shell body, fan motors, fan impeller, air guns fire tube, damper controller, damper baffle, a cam adjusting mechanism diffuser plate. 2, the ignition system functions in that the ignition system ignites a mixture of air and fuel, its main components are: the ignition transformer, the ignition electrode, a high voltage electrical cable fire. A more secure electronic ignition system called ignition pulse, is widely used Zhuoyi energy and other natural gas boiler manufacturers. Which facilitate saving, you can simply press a finger, and safe, does not occur due to unexpected accidents occur flame, once the stall state occurs, the control system can close the solenoid valve, off gas passage 3 days , system monitoring function monitoring system is to ensure that the burner safe and stable operation, the main components are flame detectors, pressure monitors, temperature monitors and the like. 4, functions of the fuel system of the fuel system is to ensure that the desired fuel burner. The fuel oil burner system are: tubing and fittings, pumps, solenoid valves, nozzles, heavy oil preheater. Gas burner mainly a filter, pressure regulator, solenoid valve, and then firing solenoid valve, the fuel valve. 5, electronic control system electronic control system command center and the focal the above system, the primary control element is a control box, with different programmer for different burners, the common programmer has: LFL series, the LAL series, LOA series, LGB series, the main difference is the time of each different program steps. The controller 1, ultra Encyclopedia Chinese LCD display, built-in luminous incandescent lamp, regardless of the day night, the screen clearly visible. 2, the image level animation display state, condition, valve status, alarm status, operation of the boiler at a glance. 3, CPU intelligent central processor, all the programs focused on a digital chip, scalability, high degree of automation, simple, and powerful. 4, includes a time setting, temperature setting, setting valve, a continuous setting, timer setting, and other control functions pressure setting, arbitrarily set the working state. 5, includes a low level alarm (anti-dry function), ultra high temperature alarm, alarm and other ultra-high pressure alarm and chain protection (shutdown), eliminate safety hazards. 6, detailed self-diagnosis, record, store alarm information, enables ready access to an alarm condition, easy inspection and maintenance.

9.4MW YQW gas-fired thermal oil heater for clean-energy industryThermal oil heater is a kind of new heat energy equipment with low pressure and high temperature, playing an important role in various industries. Huagang Gas Group is a sino-foreign joint venture enterprise, which established by Kunlun Energy Company Limited and Huabei Oilfield Company. The company is engaged in natural gas, liquefied petroleum gas, blast furnace gas and so on. Due to the stringent quality requirement for pipeline gas in China, all natural gas needs to be decarbonized and desulphurized. A high-quality steam 6t fired boiler factory price industrial bhutan is one of the key equipment for the productive process. With the development of global environmental policy, the demand of clean energy is growing with each passing day. Huagang Gas Group has carried out public bidding to purchase one set of thermal oil heater to meet the production need. Relying on rich experience and powerful comprehensive technology strength, ZOZEN won the bid and provided 9.4MW YQW series thermal oil heater for them. The heat exchange surface of the thermal oil heater adopts multi-loop round coil tube structure, which features high security and sufficient heating surface. The waste heat boiler, air pre-heater and economizer are installed on the tails of the thermal oil heater to effectively improve the thermal efficiency (The thermal efficiency of ZOZEN thermal oil heater can reach up to 95%). Moreover, this kind of thermal oil heater adopts perfect running control and safety monitoring device, which can control working temperature strictly and guarantee the safe operation.

Acceptance of low nitrogen renovation project management approach gas-fired 6t fired boiler factory price industrial bhutans in order to successfully carry out the transformation of the company low-nitrogen, low nitrogen transformation and acceptance process will now be regulated in response to acceptance of work under different circumstances, thus does not affect the progress of the company's overall transformation of low-nitrogen, It is organized as follows. The company low-nitrogen transformation acceptance criteria refer to "Beijing Gas (oil) boiler low nitrogen transformation Yijiangdaibu fund management approach" in low-nitrogen transformation acceptance requirements, low nitrogen transformation of the company and the manufacturers signed contracts for acceptance, and a phased acceptance carried out the way, it is divided into the following four stages: prior to acceptance confirmation from the manufacturer, pre-acceptance, government low nitrogen transformation and acceptance, final completion and acceptance. First, the low nitrogen gas boiler renovation project before pre-acceptance confirmation from the manufacturer to achieve the requirements of the contract 1. The actual standard for this type of project, the next step is direct acceptance process. 2. The actual contract can not reach the required standard (manufacturers to lower the acceptance criteria) for such projects, communication with the manufacturers of xx, re-sign a supplementary agreement or contract, according to a new contract or acceptance protocol standards. 3. The actual contract not up to the required standard (manufacturers do not agree or do not allow the government to reduce the acceptance criteria) for such projects, communication by the xx with the manufacturers, to terminate the contract, non-acceptance. Second, a low nitrogen gas boiler renovation project pre-acceptance satisfy items (1 projects above) pre-acceptance required to start the pre-acceptance operates in the following claims. 1.xx after the company confirmed that manufacturers have reached the standard contract, the company launched an internal pre-acceptance, and notify the relevant Division, Center for Technology Management, Operations Management Center attended. 2. Pre-acceptance of the project can be divided into environmental inspection and acceptance of two parts, the project must meet the acceptance requirements of environmental protection (standards and materials), to enter the next "low nitrogen transformation of government acceptance" stage. Unqualified acceptance content, fill out the on-site rectification notice, rectification, manufacturers, construction units, divisions, technical, operational and other relevant units to sign it by the deadline. 3. If the project environmental impact there is acceptance, boiler and other major security issues, not by pre-acceptance; In addition, pre-acceptance by the environmental protection, engineering, pre-acceptance deadline for correction. 4. In response to these contents rectification notice, by the manufacturer or xx arrange the construction unit to develop corrective plan submitted to the relevant divisions, technical, operational management center knows, in order to determine the final acceptance plan. Third, the low nitrogen gas boiler renovation project government low-nitrogen transformation project through the pre-acceptance and acceptance of environmental protection, and acceptance by the Government Division organized low-nitrogen transformation inspection department, relevant content is organized as follows. 1. A low nitrogen acceptance by the division of the transformation EPA invited, and notifies the acceptance time OA xx, center management technology, operation and management center. 2. The notification by the equipment manufacturers xx company to deal with the EPA project acceptance. 3. Technology Management Center, operation and management center according to the situation, coordination, cooperation division of the Environmental Protection Agency to complete the inspection. 4. acceptance by EPA, proceed to "completion and acceptance of the final" stage. 5. If the EPA does not pass inspection, subject to the opinion of the EPA, the Environmental Protection Agency if given a second chance acceptance, arrange for rectification by the Environmental Protection Agency xx grasp, and to give the exact time of commissioning compliance, and older than the Environmental Protection Agency to give the second acceptance time more than 3 days; EPA if not given a second chance of acceptance, the acceptance consequences borne by the manufacturer and by the execution of the contract with reference to the subsequent procedure. Fourth, low nitrogen gas boiler renovation project completed after final completion and acceptance 1. EPA acceptance, notify the manufacturer xx by the company, the construction unit to start the rectification work. Factory or construction unit for rectification according to plan in accordance with the rectification notice requirements. 2. The respective divisions, technical management center, operation and management of the center to collaborate rectification work, with supervision. 3. After the completion of the rectification project, organized by the xx-related divisions, technical management center, operation and management center participate, final completion and acceptance, to complete the transfer.