40 ton oil gas steam boiler

Introduction of fuel gas-fired boiler fuel gas-fired boiler Product Description: Fuel gas-fired boiler fuel but also refers to both gas boiler. Only boiler fuel called oil-fired boiler, gas boiler can only be called a gas boiler. If the configuration boiler fuel gas or dual fuel burners, then the boiler is oil or gas boiler. Fuel gas-fired boiler is a more general concept, fuel gas-fired boiler is divided into water boilers, hot water boilers, 40 ton oil steam boilers and thermal oil boiler, according to their own use to select a different fuel gas-fired boiler time of purchase. Fuel gas-fired boiler is different from coal-fired boilers, which requires the use of a burner fuel is injected into the boiler furnace using a combustion chamber without the use of fire grate facilities. Because not produce fuel ash after burning fuel gas-fired boiler, fuel gas-fired boiler so without slagging facilities. Oil injected into the furnace, if the gas and air mixture within a certain range, or turned off, it is easy to explode. Therefore, fuel gas-fired boiler combustion required to adopt automation and control systems. Fuel gas boiler compact, small boiler and ventilation, water supply, control and auxiliary equipment are arranged on a distribution box, it may also be assembled and medium-sized factory. Advantages: the advantages of fuel gas-fired boiler: 1), high efficiency boilers. 2) simple structure. 3), supporting the use of simple auxiliary. 4), and the whole intelligent automatic control system with multiple levels of protection. 5) equipped with burners (blower) and a flue muffler system, reduce the noise of the boiler operation. 6), should be equipped with automatic dosing unit, the water treatment device. 7), with other monitoring and limiting device should be at least 24 hours to ensure that the boiler safe operation of unsupervised. 8), before starting the first boiler is purged before ignition function automatically. Boiler maintenance: (1) Dry regimen: the boiler furnace shutdown to discharge water, the inside completely remove the dirt, rinse, drying in the furnace with Weihuo (be careful not to fire), and a diameter of 10-30 mm in size massive quicklime installed sub-plate, placed in the drum, without contacting the metal with lime, quicklime weight, calculated to the drum 8 kilograms per cubic meter volume, then all manholes, hand holes pipe valve closed, checked every three months, such as lime ingredients like broken, i.e. the need to replace, should be re-run the boiler and the lime disk unloading. (2) Wet regimen: After Shutdown of the water discharge released, the internal completely remove the dirt, rinse, refill treated water to the full, the water was heated to 100 deg.] C oven, so that the water discharge gas outside of the furnace, then close all the valves, cold climates where moisture can not support the use of law, so as not to damage the boiler furnace water freezes. Structural features; fuel gas boiler is different from the coal-fired boiler, which requires the use of a burner fuel into the boiler furnace using a combustion chamber without the use of fire grate facilities. Because not produce fuel ash after burning fuel gas-fired boiler, fuel gas-fired boiler so without slagging facilities. If the hydrocarbon injected into the furnace with the air mixing within a certain range, or turned off, it is easy to explode. Therefore, fuel gas-fired boiler combustion required to adopt automation and control systems. Fuel gas boiler compact, small boiler and ventilation, water supply, control and auxiliary equipment are arranged on a chassis, the assembly may also be medium-sized factory. Now the main element and the pressure connection of the fuel gas boiler are as follows: 1, the main fire tube boiler pressure parts: the boiler shell, a tube sheet, furnace, smoke pipe; 2, the main pressure element water tube boiler: drum (drum), water wall boiler bank, serpentine tube header; 3, the main pressure connection element fuel gas boiler: the main welding, expansion may be part.

Natural gas boiler is a kind of thermal energy conversion equipment, which uses natural gas, liquefied gas, city gas and other gas fuels as fuel to burn the heat released from the furnace, heat the water in the pot, and make it vaporize into steam. Water in a pot (drum) is constantly heated by the burning of gas fuel in the furnace to heat up the temperature and produce pressurized steam. Because the boiling point of water increases with the increase of pressure, the pot is sealed, and the expansion of steam in the boiler is restricted to produce pressure to form a thermal force. Strictly speaking, the steam of a boiler is heated to saturated water and vaporized in the drum at constant pressure. It is widely used as an energy source. Natural gas boiler heating In order to protect indoor warmth and human health, so when choosing natural gas boilers, safety issues are very important, and quality issues can not be ignored, only with good quality, in the use of more assured. Some services can also be done better, the choice of heating is customer satisfaction. Understanding natural gas boilers is certainly a need to know the sales situation of the products, if the natural gas boiler reputation is good, it is still very good in comprehensive aspects, worthy of consumer choice, the conversion of performance and thermal energy can also be consulted. There will be no problems when used like this, and there will be no need to worry about electricity during installation The pressure is not enough. Natural gas boiler shut-down method: after stopping the powder feeder, blow the primary duct for 5 minutes before stopping the oil gun. Oil guns should be blown one at a time, not multiple at the same time. After blowing the gun, ventilate the furnace of natural gas boiler for 5 minutes for 8 minutes, and the air volume is not less than 20% of the rated load. To remove combustible material from the furnace. According to the fuel, natural gas boiler can be divided into natural gas 40 ton oil steam boiler, city gas steam boiler, coke oven gas steam boiler, liquefied petroleum gas steam boiler, etc. According to the structure form, it can be divided into vertical steam boiler and horizontal steam boiler. Natural gas boiler is shell type Full wet backflow three-way pyrotechnic tube structure, flame combustion in large combustion chamber micro positive pressure combustion, complete extension, low combustion heat load, high combustion heat efficiency, effectively reduce the exhaust temperature, energy saving and consumption reduction, use more economical, The heat absorption strength of the boiler is improved by adopting the structure of corrugated furnace tank and threaded smoke pipe, and the heat exchange surface is expanded to meet the need of heat expansion. It is scientific, reasonable and durable.

9.4MW YQW gas-fired thermal oil heater for clean-energy industryThermal oil heater is a kind of new heat energy equipment with low pressure and high temperature, playing an important role in various industries. Huagang Gas Group is a sino-foreign joint venture enterprise, which established by Kunlun Energy Company Limited and Huabei Oilfield Company. The company is engaged in natural gas, liquefied petroleum gas, blast furnace gas and so on. Due to the stringent quality requirement for pipeline gas in China, all natural gas needs to be decarbonized and desulphurized. A high-quality 40 ton oil steam boiler is one of the key equipment for the productive process. With the development of global environmental policy, the demand of clean energy is growing with each passing day. Huagang Gas Group has carried out public bidding to purchase one set of thermal oil heater to meet the production need. Relying on rich experience and powerful comprehensive technology strength, ZOZEN won the bid and provided 9.4MW YQW series thermal oil heater for them. The heat exchange surface of the thermal oil heater adopts multi-loop round coil tube structure, which features high security and sufficient heating surface. The waste heat boiler, air pre-heater and economizer are installed on the tails of the thermal oil heater to effectively improve the thermal efficiency (The thermal efficiency of ZOZEN thermal oil heater can reach up to 95%). Moreover, this kind of thermal oil heater adopts perfect running control and safety monitoring device, which can control working temperature strictly and guarantee the safe operation.

It is understood, Shaanxi Province, 2018 - Continuing to promote the 2019 inspection work in key areas of defense sky war, now in its third phase. November 22, according to the requirements of the program of work for the inspection team to carry out all the Guanzhong area of ​​Shaanxi Province counties (cities, districts) inspection work, inspected 262 units, identify problems and 49, have been transferred to the supervision of Shaanxi Province 20 .

20 environmental issues in the supervision, accounting for 8 in Xi'an, Weinan City, accounting for 7, Baoji City accounted for two, accounting for two Xianyang City, a Korean city of Tongchuan City, Yangling Demonstration Zone and the New West Ham is not problem found.

More units found the problem, companies of "scattered dirt," the one, accounting for 5%; industrial pollution prevention and control 10, accounting for 50%; a coal-fired boiler renovation, accounting for 5%; comprehensive management of dust 1 , accounting for 5%; complaints 4, accounting for 20%; at three open burning control, accounting for 15%.