mechanical natural gas steam atmospheric pressure boiler manufacturers

Steam mechanical steam atmospheric pressure boiler manufacturerss and thermal oil heaters which is better? Which is more energy-efficient? Steam boilers and thermal oil heaters, which is more fuel cost savings? At the same power (represented with evaporation) for comparing the boiler, HTF medium because of the high temperature, so that the temperature of the steam exhaust gas temperature than the exhaust gas with a higher heating power of the boiler, the exhaust gas temperature directly affects Thermal efficiency. That same power (represented with evaporation) conditions, the efficiency is not high efficiency oil boiler steam boiler. In fact, now you finally choose what kind of boiler is required to rely on the temperature of your decision. If you ask a medium temperature to 300 degrees, you can only choose oil furnace; if you think there is a live medium temperature of 180 degrees is enough to use, it is recommended that you choose a steam boiler, because it is more energy-efficient with conditions). These are the kind of steam boilers and thermal oil heaters and today we analyze all the information of more energy-efficient, and the above information indicates that the steam boiler more energy saving, more fuel-efficient.

Vertical projection which features good steam mechanical steam atmospheric pressure boiler manufacturers boiler having a vertical steam energy conversion device, the input of thermal energy by chemical, electrical, and high temperature flue gas to the furnace, thereby converted into electrical energy, and to provide the desired life for people heat, on the safety and convenience of all with excellent product qualities, then what good salient features vertical steam boiler has it? 1, reliable safety performance vertical steam boiler in terms of product safety has a lot of protection, by ground fault protection, overvoltage protection and power protection and other measures to make operation of the boiler can always be in a safe state, when the pressure is too low or there is leakage, the boiler will cut off its own power button, so to ensure the life and personal safety of the boiler. 2, the portable vertical steam boiler operation which is preferably used, which have to see ease of operation and convenient operation of the boiler does not require user intervention excessive production process, just to the introduction of the electric power source control box start button to enter the automatic operation state, and when the job if the amount of water in the furnace suddenly reduced, the vertical steam boiler control system is also used to automatically replenish the water in the water tank to fill the pump through the apparatus in order to achieve high efficiency of production operations process. 3, small size and yield stability compared with the conventional boiler products, the type and volume of the vertical steam boilers are an advantage, not only a wide range, and the volume of the boiler is very small, but it has a large steam room to make product productivity and quality are the most significant upgrade in order to obtain a more stable production company that won the biggest profits. The above is a brief introduction which has a prominent characteristic of a good vertical steam boiler, not difficult to find, the boiler reliability in terms of safety and convenience of operation have notable features, but also in the volume and yield stability also has a prominent feature , production efficiency and product quality to make the most significant upgrade, but also to ensure personal safety as well as the effect of the use of the boiler.

What are the precautions in the loading and installation of gas-fired steam mechanical steam atmospheric pressure boiler manufacturerss?

Gas-fired steam boilers are a very wide range of special equipments, widely used in food, chemical, paper, textile, construction and other industries. In the process of loading and installing a gas steam boiler, some problems must be paid attention, otherwise it may cause a certain degree of economic loss.

1. Pay attention to the following matters during the loading and unloading and handling of gas-fired boilers: the lifting capacity of the lifting equipment should match the weight of the lifting boiler. The lifting lug on the boiler with the lifting lugs that cannot be used for lifting can not be used for lifting. The length of the steel cord should be reasonably selected to avoid the scratching of the furnace due to the improper length of the steel cord. The boiler must be protected from any damage during handling and handling.

2. Reserves for maintenance space When installing boilers, ensure that there is sufficient maintenance space around the boiler.

3. Setting and precautions for the base and base of the gas steam boiler The boiler body must be installed on the basis of 100-150mm above the floor of the boiler room. It must be confirmed with the technical personnel of the boiler manufacturing company in advance and constructed according to the basic drawings. The anchor bolts must be reserved on the foundation. The foundation shall be capable of withstanding the maximum weight of the boiler and the amount of water it holds. When installing the base, you must first position it. After positioning, adjust to the same length of the two diagonals of the base, and then tighten all the fixing bolts. The installation of the base is carried out with reference to the reference line.

4, general precautions Be careful not to tilt and impact the boiler and accessories too much. No combustibles can be placed around the boiler. Do not use oil and water to smother the boiler. The boiler should normally be installed in a separate boiler room. The new gas-fired boiler room should not be connected to the house. The boiler room shall not be connected to Class A, Class B and Category C fire hazard rooms using flammable liquids. If connected to other production plants, the application firewall is separated.

5. The fire resistance grade and fire protection requirements of the boiler house building shall comply with the requirements of the Code for Fire Protection of Building Design and the Code for Fire Protection Design of High-rise Civil Buildings. The ground of the gas steam boiler room should be flat, non-flammable, no water accumulation, and the foundation load should meet the requirements. The power supply voltage of the gas steam boiler room should be stable to avoid causing the electrical components to burn out. If the voltage is unstable, it is recommended to install a voltage regulator. Ventilation equipment should be installed in the boiler room, and the boiler should be kept at room temperature below 50 °.

After years of efforts, the overall governance of Beijing's total coal consumption has achieved initial results. By the end of 2017, all of the total coal consumption of 4.85 million tons, accounting for only 5.6% of the city's total coal consumption, coal-fired completed three years ahead of "Thirteen Five" energy development plan period proposed control in less than five million tons The goal.

By 2013 to 2017 for five consecutive years to promote the work Yajian coal, Beijing successfully completed the first phase of the "Yajian based" Yajian coal work, go to "run mainly to protect", established clean energy use long-term mechanism to combat second phase coal-fired rebound. Beijing's total coal consumption in the future will be long-term control in less than 4.2 million tons, coal is mainly used for urban hazardous waste incineration, energy and protect the city safe operation of remote mountain villages Beijing winter heating three aspects.

As of last heating season, heating central heating proportion of clean energy in Beijing has reached 98%, in addition to parts of Pinggu and Yanqing, Miyun three zones as well as six coal-fired heating boiler room, other regions have achieved heating boilers no Coal.

This year, Beijing will complete the rural village 450 villages, the villagers coal public spaces and 53,000 square meters of agricultural facilities Zizhong change clean energy work, and strive to complete the Yanqing east of central heating central heating fuel in pre-season coal boiler clean energy transformation, in an orderly coal-fired heating center south of Yanqing, Pinggu Riverside, Xinggu, Miyun Taishi Tuen urban and non-built-up areas boiler clean energy transformation.

In addition, this year, Beijing Yanshan Petrochemical Industries will start coal-fired facilities clean energy transformation, and continue to consolidate six districts of the city, the southern plains "No Coal" results have been achieved on the area of ​​clean energy transformation, embargo, ban, ban save bulk coal, to prevent rebound.

Speed ​​up the construction of clean energy facilities, Beijing will work to enhance the rural town of Plains gas pipeline network construction, improve rural consumption of clean energy supply security capacity, promote Plains natural gas pipeline "through town." In the gas network facilities are relatively weak areas, speed up the liquefied natural gas, compressed natural gas supply facilities, increase the supply capacity of natural gas distribution in rural areas. At the same time, we continue to promote the 2018 "from coal to gas," "coal to electricity" supporting gas engineering and construction of power transmission project, to meet the full 2018-- coal to clean energy by 2019 energy demand for the heating season.