Fully Automatic 6t Natural Gas boiler

Different meaning of the data and the oxygen content of the exhaust gas fired fully automatic 6t boiler: A boiler oil-fired boiler which, it is explained below target, because through knowledge and understanding of this kind of boiler, can broaden everyone's knowledge, and at the same time, familiar with the different boiler type, so as to achieve a comprehensive understanding of the boiler, do not miss any of which. 1. fuel boiler, 0.5 tons and 0.35mw, its meaning is the same as you? An oil boiler, and 0.5 tons 0.35mw these two parameters, which specifically refers to, and is not the same, because the former is the rated evaporation of the boiler, while the latter refers to the rated power of the boiler or the rated for heat. In addition, in the unit, the two are not the same. So, obviously, on this issue, that the answer is not the same. 2. Industrial boilers, oil-fired boiler is why the general level? In addition, the oxygen content in the exhaust gas boiler fuel, how much is more appropriate? Industrial boilers, if its use is oil-fired boiler, then, it generally is a Class B boiler, that is, the pressure of the boiler is rated at 2.5MPa or less. Oil-fired boiler exhaust gas oxygen content and, in general, is controlled within the range of 3% to 5% is appropriate. If less than 3%, the problem of incomplete combustion occurs.

Oil and gas fully automatic 6t boilers in overseas markets

Biomass boilers are very popular in overseas markets due to their energy saving and environmental protection characteristics, but oil and gas boilers are selling well in overseas markets due to their ease of use, high efficiency, and environmental protection.

75 ton CFB fully automatic 6t boiler

Fuel Flexibility: The most important advantage of the CFB boiler is the flexibility of firing a wide range of coal from 9500 to 25000 kJ/kg. CFBs can also burn a limitless number of other types of solid fuels, separately or mixed with coal. The limitations if any are only in the feeding and other mechanical equipment. The output capacity and steam parameters depend on the heating value of the fuel.

75 ton CFB boiler can use different types of solid fuels that include low quality coal, lignites, coal blends, bagasse in sugar plants, bark in pulp and paper mills, coal washery rejects in mines, petcoke and other bio mass products. Most of these fuels are seasonal, production or availability dependent. Mixing with coal or using coal when other fuels are not available gives an uninterrupted steam and energy supply.

1. Sulphur Dioxide removal: Firing high Sulphur coal requires the use of a Flue Gas Desulphurisation (FGD) plant to keep emissions within statutory limits. An FGD is a complicated plant that requires high capital investment and operational cost. In a CFB limestone addition in the furnace converts the SO2 to sulphates during the combustion and circulation which goes out with the ash. A CFB boiler costs less than a PC fired boiler with an FGD.

2. NOx Reduction: The combustion temperature in the furnace in a CFB boiler is considerably less than PC boilers resulting in lower NOx emissions. There is no additional requirement of separate NOx capturing devices which reduces capital investment.

3. Maintenance: Eliminating the pulverizer and pulverized coal piping reduces maintenance, related outages and equipment redundancy. A part of this saving is offset by higher maintenance due to erosion in pressure parts and furnace area, and maintenance of the refractory.

It is quick to understand our side of the fully automatic 6t boiler, boiler and industrial furnace is Haimen sulfur dioxide, one of the important sources of emissions of nitrogen oxides and soot, boiler and industrial furnace to carry out remediation is to control total energy consumption, air pollution control, energy conservation an important measure low-carbon development.

Recently, Haimen government issued the "2019 Haimen boiler and industrial furnace remediation work plan" put forward requirements on the city's boiler and industrial furnace remediation work.

First, the target for the full year to complete the remediation boiler remediation tasks. DiBiao transformation of ultra-low emissions before the end of the year, the city's 2 sets of 35 tons of steam / hour or phase-out coal-fired boilers clean energy alternative to complete 2 sets of 75 tons of steam / h coal-fired boiler and 1 biomass boiler, completed 6 low nitrogen gas-fired combustion units transformation. Phase out coal-fired boilers to consolidate existing achievements regulation to prevent 20 tons of steam / hour resurgence of small coal-fired boilers.

Second, accelerate industrial furnace remediation. This year, the city's 32 industrial furnaces in accordance with the "out of a group, instead of a number, a number of governance" principle fully complete the comprehensive remediation tasks, promote the upgrading of industrial furnace and pollution reduction. And products of coal, petroleum coke, residual oil, heavy oil as the fuel of a heating furnace, heat treatment furnace, a drying furnace (kiln) and the like, according to cut-off high-pollution fuel combustion zone management requirements, the use of clean energy and heat plants, district heating Alternatively heat or the like.

Scheme requires 20 December, the district town organize and complete acceptance of the unit boiler and industrial furnace remediation tasks. Boilers have been removed embodiment physical treatment, use can not be recovered; coal-fired boilers use gas, electricity, light oil clean energy and stable operation of a month or more. Gas-fired low-NOx combustion transformation, the transformation of ultra low emission biomass boilers and coal-fired power boiler ultra-low emission transformation, to have construction contracts and construction unit transformation, after the completion of the transformation have qualified environment monitoring report. After the renovation of industrial furnaces to natural gas, electricity, light oil clean energy, the furnace can not be used and the coal and its products. Boiler and industrial furnace remediation in line with production safety regulations.