2 ton industrial oil boiler

Recently, Shaanxi Province issued a notice "issued four Battle 2019 program of work". Programs that: improve the mechanism of heating prices, heating prices reasonable development of clean, green electricity implement ultra-low emissions coal-fired power plants, a comprehensive clean canceled preferential tariff class of high energy-consuming industries unreasonable prices and other preferential policies. Off Area ban coal stove, substantially eliminated cogeneration heating pipe network coverage in the range of coal heated oven (furnace).

According to focus on the use of coal and clean use of principles, focusing on reduction of non-coal for electricity, increase the proportion of electricity from coal. Increase Condensing units and cogeneration units technological transformation efforts, speed up the heating pipe network construction, fully release and improve the heating capacity, eliminate coal-fired boilers and scattered inside the pipe network coverage. Actively implement alternative heat source, deadline for shutting down the Guanzhong area below 100,000 kilowatts thermoelectric ratio does not meet the national standard or alternative heat source thermal units. Optimal operation mode cogeneration units, strictly implement the "hot set electricity."

For customers who want to know the price of oil and gas 2 ton industrial boilers, they should first confirm the use of the gas boilers they want to purchase, and secondly consider the brand, tonnage, model, boiler operating costs and after-sales service. In this way, you can purchase a gas boiler at the right price. For example, the WNS1-1.25-Q boiler produced by ZBG has a production standard of GB. The price of such a boiler body is about US$17,769. If it includes various valves, meters, economizers, feed pumps, burners and other auxiliary equipment accessories, the full set price is about US$29,545. Such a price is already very affordable for a high-quality energy-saving and environmentally-friendly oil and gas boiler. Such a boiler itself has high thermal efficiency and automatic operation, which greatly reduces the operating cost of the boiler.

What are the three common 2 ton industrial boiler combustion? Urban coal-fired boiler has been difficult to solve, because especially small coal-fired boilers type cluttered and more widespread particularly difficult to handle. On the one hand burning low power, on the other hand is more a waste of resources. Under the requirements of environmental protection requirements, many cities in the relevant part of the requirements necessary gas (oil) boiler retrofit or replacement of 10t / h coal-fired boilers. The transformation of the former needs to focus attention to the following questions: whether the site is useful region of central heating boiler heating of small alternative program. The useful life and corroded boiler, if the boiler by Zhengzhou fast boiler or other professional testing organization to determine the useful life of less than five years, the transformation of value is not high. Determine whether the laying of gas pipeline convenience, liquefied petroleum gas or other fuel supply and transportation issues. Comparing the cost of renovation and equipment manufacturers advantages and disadvantages, in determining the needs of the transformation plan in compliance with these principles. Selection of fuel. Under the premise of fuel sources have, the most economical natural gas pipelines, liquefied petroleum gas, followed by a final light diesel oil. Also, consider the surrounding environment from fire and explosion safety. In general, the system and the soda boiler pressure parts and preferably not modified to adhere to the original power, are demand, under conditions not substantially change the pressure member, than the original power increased by 10% to 20%. Boiler pressure parts for major changes in the program desirable. The transformation process is necessary to ensure the safety of boiler pressure parts of (mostly small commercial general pressure boilers), followed by incineration system to ensure the safety factor, the decline in the risk of explosion, fire accidents. Recognize the transformation of the planning process, in a timely manner, the environmental protection, the gas company, fire department, urban construction and timely communication with the boiler section to monitor and ensure the transformation plan can proceed smoothly. When the boiler is burning way during boiler selection will take into account an element, the following three common boiler burning approach advantages and disadvantages brief analysis cf: 1 Decentralized incineration strengths: this way is not burning premixed, but the gas nozzle mouth dispersed with each other, and then burning it. Incineration relatively simple way, as more stable as compared to the flame. Disadvantages: Due to a longer flame, it is prone to the phenomenon of incomplete burning, more carbon monoxide and nitrogen oxides will occur, it is not conducive to the use of full-fired boilers, to improve the thermal power of the boiler, and the boiler emissions standards are difficult to reach. 2. premix approaches incineration advantages: premixing air and gas, a multi-way heat radiator, to improve the strength of heat transfer. Strengths of this approach is that the burning of the burning flame is more clear, and the higher heating power. Disadvantages: incineration requires precise ratio premix burning rate is fast, uniform burning radiant heat transfer full power high flame temperature below 1200 deg.] C, all NOx completely burned and the occurrence of low flue gas temperature, condenses, good heat recovery and high power. 3. No flame burning incineration space before incineration approach uniform mixing with the gas in the gas boiler. When using this approach, in the process of incineration gas in the oxygen demand is not made in the ambient air demand, only needs to achieve instant complete incineration air mixture reaches the incineration zone. Approach in the selection of incineration, incineration demand for the advantages and disadvantages of different approaches, carried out mutatis mutandis selection, a good way is also advantageous burning boiler to reach plenty of incineration, thermal power increase, decrease the role of emissions, and therefore, it is important to choose carefully.

Palm oil mill produces large quantity of waste, that is palm kernel shell. Palm kernel shells are the shell fractions left after the nut has been removed after crushing in the palm oil mill. Palm kernel shells are a fibrous material residue of palm oil milling operation. Biomass residues are the main source of energy input to the mills using cogeneration system. And it has been estimated that total biomass energy potential has accounted a large proportion of total power produced in countries, especially places where have rich biomass energy. There is excess biomass residue produced than needed as fuel in 2 ton industrial boilers to meet energy and process heat demand with efficient cogeneration system. The cogeneration system is the best-proven method and is sustainable long as there is supply of palm fruit.