gas fired boiler manufacturer in rajkot

Gas fired boiler manufacturer in rajkot heat loss through the combustion of fuel gas boiler, will release some heat, which will supply part of the user, some will be recycled and part is inadvertently wasted. So these are wasted heat lost through the ways in which it (1) heat losses:? Flue gas exhaust gas boiler part of the heat into the atmosphere, causing the boiler heat losses, it is each boiler term heat loss Dazhong biggest one. The main factors influencing the heat loss is higher exhaust gas temperature and the amount of smoke exhaust gas temperature, the greater the amount of smoke, the greater the heat loss. Low exhaust gas temperature depends mainly on the number and operating conditions of the heating surface; the amount depends on how much leakage exhaust case and the furnace excess air, flue. (2) heat loss incomplete combustion gas: a part of the unburned combustible gas is discharged with the flue gas to heat loss caused by heat in the flue gas. The main factors affecting the incomplete combustion gas heat loss is the excess air and furnace structure. Excess air coefficient is too small, uneven air is mixed with fuel, easy to generate carbon monoxide and other combustible gases; excess air coefficient is too large, the furnace temperature is lowered, the combustible gas is not easy ignition and combustion. Furnace volume is too small, combustible gases in the furnace too late to enter the combustion flue gases caused by incomplete combustion heat loss. (3) heat loss: the furnace heat loss, frameworks, pipes, door opening caused by heat dissipation to the surroundings. Size depends on the heat loss factors of the size of the surface area of ​​the furnace gas steam boiler, heat insulating properties and thickness, the outside air temperature and the flow velocity. Electric heating reactor common external damage: an electrically heated reactor despite external corrosion has a high etching resistance against acid and alkali resistance, but our electrical heating by the heating apparatus is a kettle layer and an outer tire iron constituted. Such a medium is iron acids and bases are not corrosion-resistant. If we would have the production process if the reactor cover or screwed pipe joints without seal failure or leak acid tire iron reactor apparatus for electrically heating the outer corrosion. Corrosion support member 2. The reactor was heated electrically heated reactor during installation, support or other support member may be mounted directly on the floor, due to the long manufacturing operations on the floor may be deposited with corrosive media, so that for support our reactor electrically heated apparatus corrosion, resulting in the supporting force of each of the support produces a change resulting in a change in stress in the damage produced during heating layer. 3. The electrically heated reactor stress spout in the electrically heated reactor, when the steel of the pipe and the pipe joint, since the thermal deformation and the reaction was heated electrically heated autoclave vessel or duct stressed cold might damage the pipe.

In 2019, the union group will embark on a new journey: a training mechanism to deepen the development of the division with only workers; 2 integrated use of union propaganda platform; 3 to create innovative model worker Studio; this will be the union in 2019 to everyone... bring a new experience. Let's get 2019 new leaps and bounds under the guidance of the company "professional life, work lean" core values.

17.5MW YQL thermal oil heater for oil refining industryThe thermal oil heater is an essential equipment in oil refining industry, providing heat energy for rectification, hydrogenation, catalysis, gasification and other production processes. Dongfang Hualong Group is a large enterprise engaged in processing and sales of petroleum, main products include gasoline, diesel, propylene, liquefied gas, slurry oil, petroleum coke, petroleum machinery, etc. With the global green development trend, oil refining industry will adjust its industrial structure on a large scale. Dongfang Hualong Group seized the opportunity to accelerate transformation and upgrading and vigorously develop the circular economy. As an important part of production line, the thermal oil heater takes the lead in achieving equipment innovation. Hualong Group planned to purchase several energy saving and environmental friendly thermal oil heater to meet the needs of the production line. Quality has always been ZOZEN’s lifeline. In the pursuit of product quality, “never compromising to quality” has always been the principle that ZOZEN carries through, this kind of craftsmanship spirit successfully earned Dongfang Hualong Group's trust. The sales manager of ZOZEN provided the company 4 sets of 17.5 MW gas/oil-fired thermal oil heaters after learning about their actual demands. The thermal oil heater has wide adaptability of fuels, is suit for natural gas, coal gas, marsh gas, diesel, light oil, etc. The heat exchange surface adopts three-pass round coil tube structure, which features more sufficient heating surface. It is also equipped with an advanced burner to ensure the NOx emission below 30mg/m3. The waste heat fired boiler manufacturer in rajkot, air pre-heater and economizer are installed on the tails of the thermal oil heaters to effectively improve thermal efficiency, which can reach above 98%.

Improve the thermal efficiency of gas steam fired boiler manufacturer in rajkot steam boiler to improve the thermal efficiency of gas is a problem many users are taken, I believe this issue is the direction of each used in the production of various types of gas steam boiler manufacturers have been in the study. Many users at the time of the gas-steam oven operates, often in the actual production process, we found some new problems, but all the problems, the most vexing is the high temperature exhaust gas steam boilers, thermal efficiency than low phenomenon that a serious impact on our work, then how should we do to improve the thermal efficiency of it? need to know this is the best way to meet the low-temperature properties of gas and steam comes as synthetic gas steam. However, the vast majority of synthetic gas and steam biphenyls, benzene derivatives of both components of the complex, or a vapor of volatiles has strong carcinogenicity, it is strongly recommended that the client select the type of mineral oil vapor product gas. Second, gas and steam products to meet the low temperature performance process, but also have a relatively high flash point required. In general, gas steam engineers suggest, low temperature gas steam flash point not lower than the opening 200 ℃. After a professional manufacturer of continuous research and improvement of its equipment, in order to improve its thermal efficiency was found to be increased tail gas steam boiler heating surface of, say, air preheater and economizer. But when organic heat carrier furnace return temperature is high, you can not set the economizer, air preheater can only be set to alleviate the situation. So if no gas steam boiler and other heating systems for low temperature heat exchanger, then the only way to improve the energy efficiency is adding air preheater. After adding air preheater can be a corresponding increase in gas flow rate of steam, gas steam boiler in order to ensure safe, reliable and stable work, the thermal efficiency of gas-steam boiler plant will be a corresponding with the increase.