wood based panel industry natural gas hot water boiler manufacturers

Technical features of WNS boiler

The WNS boiler produced by ZG boiler is a oil and gas boiler, which can be divided into WNS oil and gas hot water boilers and WNS oil and gas steam boilers, and is also a well-developed hot boiler by ZG boiler. The technical features of this boiler are as follows:

1. The WNS oil and gas boiler adopts a large-volume combustion chamber design, so that the fuel is fully burned and the flame fullness is good. Good for low-nitrogen combustion of fuels and low nitrogen emissions from flue gas.

2. The WNS oil and gas boiler uses an automatic low nitrogen burner + flue gas recirculation system (FGR) system to achieve ultra-low nitrogen emissions.

3. The WNS oil and gas boiler adopt advanced wave furnace structure, which not only increases the heat transfer area, but also satisfies the free expansion of the furnace after heating. At the same time, the waveform furnace structure enhances the disturbance of the flue gas and enhances heat transfer and combustion.

4. The rear of the boiler body is equipped with an energy saver and a condenser, which can effectively reduce the temperature of the exhaust gas and improve the overall thermal efficiency of the boiler. The condenser adopts "low temperature corrosion resistant" special steel to greatly increase the service life.

5. The oil and gas boiler adopts a wet-back structure and full-flanged butt welds with high reliability and low maintenance costs.

6. The use of threaded tobacco pipes in the WNS oil and gas boiler is beneficial to enhance airflow disturbance and enhance heat transfer.

7. The WNS oil and gas boiler outer packaging adopts color pattern board, mirror stainless steel or matt stainless steel board in three forms, beautiful and generous.

8. Automatic operation of the WNS oil and gas boiler, micro-positive pressure combustion, no need to draw fan, reduce boiler system investment, reduce boiler operating costs.

9. The WNS oil and gas boiler equipped with necessary thermal instruments, valves and various protection devices, to achieve continuous electric water regulation, automatic water level control and high and low water level alarm, low water level chain protection and other functions, automatic control of steam pressure and overpressure alarm and other functions.

First, when the flue temperature dropped to below 50 ℃ Solution: Check the tail may enter the flue if heated, while the flue thoroughly remove soot. No burning flue tail, can be re-started ignition; if burning, should be replaced, repaired burning member. Second, the combustion chamber when the negative pressure is too large Solution: When the exhaust gas temperature close to the temperature of the injected steam, or less than 150 deg.] C over 1 hour and stable, open the inspection hole inspection; after inspection after confirming the fire source, before start the fan ventilation. Third, shutdown or fire, air gun valve ajar solutions: reinforcing and electric steam boiler feed water drainage, or open the valve economizer recirculation tube to protect the economizer is not burning. Fourth, Kai, during shutdown lower furnace temperature, a solution of unburned fuel in the furnace: extinguishing device immediately put into vapor, carbon dioxide or other devices off fire. Five burning improperly adjusted, with insufficient wind or with the wind unreasonable Solution: Close the flue duct and baffle around the door opening, start sending prohibited, induced draft fan. These are the methods of electric heating steam boiler fast boiler to provide you with the handling of soot in the chimney, if you use electric steam boilers, with more than five can control their own boiler equipment need to be cleared up the flue, and select the appropriate method .

Shandong Mining Group in the six months after the boiler use, users submit a report to our company, our company started in 2017 using WDR0.5-0.8-Ⅱ electric fast Boiler Co., Ltd. of heating steam boiler. Large output, stable and reliable, high degree of automation, simple operation, do especially in terms of security is in place. After-sales service is very timely response to our technical consulting reply quickly and accurately. Whether it is party party products or fast fast service. My company is very satisfied. --customer feedback

Oil boilers are highly efficient appliances that can heat up large amounts of water. Some models are also very environmentally friendly; because you have the option of using recycled oil or bio-diesel as the fuel source. Oil boilers provide very even heating. Though oil burners require a separate room, you have the option of installing some models outdoors. You can also have the maintenance and checks done outdoors. In case of power outages, you can still get your supply of hot water. Oil boilers are widely used in areas that have unreliable electric connections or that do not have natural gas connections.