gas fired water tube boiler supplier in rourkela

The working principle of steam fired water tube boiler supplier in rourkelas and steam boilers for industrial structural features has brought great convenience, steam boilers led to the development of the times, the following small series to introduce you to the structural characteristics and working principle of steam boilers. Steam boiler is producing steam-based machines, people use a lot, but many of its structure and working principle are not fully aware of, it is the use of volume and pressure water tube steam boilers coal, oil and natural gas are less restrictive , I would like to have a lot of space, but also easy to arrange, in the form of a variety of steam boilers. Water in the steam drum is heated into steam, the heat emitted by the fire in the furnace, is the principle of steam steam boiler. Steam boiler works: 1, heat generated by burning coal in the furnace, the heat transfer by radiation is first absorbed waterwall waterwall Boiling water, a large amount of steam into the drum for water separation (except the DC furnace), separated saturated steam enters the superheater, and continues to absorb the furnace top horizontal flue by means of radiation, convection, heat of the flue gas flue of the tail, and the superheated steam to reach the required operating temperature. Generating steam boilers are generally provided with a reheater, it is used to heat the steam through the high pressure cylinders acting reheater go out of the reheat steam, the low pressure cylinder to continue to generate power. 2, when the pulverized coal fired boiler work, the center position of the flame will impact the amount of evaporation, generally, the lower the evaporation flame kernel, the flame kernel high evaporation amount is small, the center position of the flame will also affect the reheat steam or superheated steam temperature, generally lower the center of the flame in particular superheated steam is then superheated steam temperature to be low, otherwise higher. 3, the arrangement of the burner, pulverized coal fired boiler on, the current embodiment there are opposed wall, more Tangentially combustion, combustion bis Tangentially the like, each have their own characteristics, can not be applied because the same furnace at the same time several above-mentioned arrangement, the steam still can not directly affect the conclusion. Steam boiler structural characteristics: 1, the steam boiler body welding: the main welding using advanced submerged arc welding process, welding quality assurance. All welds were 100% primary radiation detection according to the "Steam Steam Boiler Safety Technology Supervision", according to the eligibility criteria Ⅱ pole. 2, a horizontal steam boiler combustion three return all wet back structure. 3, before steam boiler, after the smoke box sealed with high temperature are graphite asbestos material, a reliable seal, to ensure that the steam boiler flue gas does not leak when run under a slight positive pressure conditions. 4, pipe thread: the second backhaul convection heating surface of the steam boiler, we used a threaded pipe, enabling the efficient heat transfer. Enhanced heat transfer, thermal efficiency of the steam boiler, a threaded tubular light pipe is equal to 2.4. Fluid flow within the tube wall near the fluid flow velocity is very low, the presence of fluid at the wall boundary layer is called, when the thermal resistance in series of several heat transfer water into the flue gas in the outer tube, the boundary layer the maximum thermal resistance, but the boundary layer is thin, as long as the boundary layer of little disturbance, as in an ordinary pressure in a pipe wall to the boss, the disturbance of the boundary layer, will greatly reduce the thermal resistance, is effective threaded pipe one way. 5, to make the system more energy efficient, continuous adjustment using the water supply, to avoid frequent pump start. During the period, the three-pass water smoke tube leaving a wide space, the pot to ensure natural circulation of water flow. 6, the body safety devices: at the rear of the steering steam boiler chamber is provided built-proof door, the steam boiler ignition and running, if the furnace gas deflagration occurs: timely relief, preventing the furnace deflagration, safe and reliable; as built after take-off will not hurt.

ZG also manufactures high efficiency, multi fuel Industrial water tube Boilers & Steam Boiler based on technology acquired, with whom we had over 60 Years of technical collaboration. It can supply fired water tube boiler supplier in rourkelas upto 270 TPH capacity, steam at pressure upto 5.28Mpa. and temperatures up to 330. ZG has a large proven reference list of more than 1000 installations completed worldwide in last 6 decades. Water tube boiler fuel can be solid fuel, gas and oil fuel.The water-tube boilers described above are usually of a large capacity.

Recently, customers found us, consulted gas fired water tube boiler supplier in rourkela safety operating procedures and precautions, in response to your question, our technicians have given the answer. Safety operation rules and matters needing attention for gas-fired boilers. (1) when abnormal phenomenon is found in gas boiler body, how to do control device failure in safety accident should press emergency turn-off button to stop boiler operation; (2) when the boiler feed pump is damaged and the regulating device fails, it is necessary to press the emergency turn-off button to stop the operation of the boiler, (3) when there is a problem with the electric fuel, it is necessary to press the emergency turn-off button; 4 when there is a danger to boiler or personal safety phenomenon, emergency shutdown should be taken; 5. The start-stop of the burner is directed by the boiler controller according to the change of pressure. (this function is automatic) the operator should always observe the change of pressure and stop immediately if there is any abnormal phenomenon. 6. The boiler operator should observe the water level at any time during operation, especially to ensure that the replenishment tank is full of water. Operators should regularly discharge the boiler to ensure boiler water quality. 7. Once an abnormal phenomenon occurs during boiler operation, the operator should shut down immediately and start from the new engine after handling the fault. 8. The incendiary engine operator with three-phase power supply should determine the positive and reverse of the motor before the first start-up, otherwise it will not be able to do so. Normal ignition. (at this time the incendiary machine in ten seconds after the fan stop, control box alarm).

AMD Power were to buy 10 tons of steam and one 4 tons of steam condensing steam fired water tube boiler supplier in rourkela fuel gas from the company for cell processing company production and construction. From the analysis of the demand to the boiler factory, by the company solely responsible for AMD Power fully demonstrated the company's confidence in me, the smooth progress of bilateral cooperation.