9729 7000kg non ibr boiler with imported burner natural gas fired

6 tons adjusting a combustion gas steam 9729 7000kg non ibr boiler with imported burner fired, normal combustion boiler three basic aspects of indicators include a uniform supply of the fuel, reasonable ventilation, adjustment the combustion. 1, to maintain the high temperature of the combustion chamber temperature of the upper layer is preferably in the 1100 ~ 1300 ℃, flame orange in color. Flame reddish color indicates that the amount is not enough to the wind, the color white indicates that excessive wind. It should be appropriately adjusted. 2, fuel ash to reduce ash content in the combustibles to be below 10%. 3, reducing the temperature of the boiler flue gas exhaust gas temperature should be controlled below 200 ℃. 4, holding furnace negative excess air boiler is 1.2 to 1.4, by adjusting the balance of the blowers to maintain the furnace pressure is -20 ~ -30Pa. 5, the thermal efficiency of the boiler to improve the thermal efficiency of the boiler should be kept above 60%. II. Combustion Adjustment 1, the amount of fuel to air required for combustion and the amount of a reasonable distribution. Ventilation should first increase the amount of fuel increases, it should first reduce the amount of fuel supply reduced ventilation. 2, the thickness of the seam and seam thickness configuration grate speed is 80 ~ 120mm grate speed at high, middle and low profile configuration of several commonly used methods:. 9a rapid combustion of thin seam b c thick seam in low combustion. 3 thick seam combustion speed, the segment with the wind blowing principle: burn promoting intermediate ends. That is, after the coal into the coal starts to warm up the shutter, fire line front arch, the primary combustion zone, the middle grate to burn the rear grate zone. Normal combustion conditions are: fuel from the coal at the beginning of the fire shutter 300mm, uniform flames, the fire bed formation, at the end of combustion from the end of the grate 300 ~ 500mm. 4. maintain proper furnace temperature to avoid coking. The fire bed to maintain the homogeneous combustion, to avoid burning fire bed obliquely. 6. The residence time of the fuel on the grate in less than 30 minutes.

18-20 May 2017, ISH heating HVAC industry event successfully held in Beijing International Exhibition Center. Fast 9729 7000kg non ibr boiler with imported burner fired latest on-line premix vacuum hot water boiler landmark "Thalia T6" and coupled steam boiler, "Euromonitor θ5" series of products also opened a mysterious veil, show it to all visitors.

6 ton oil gas condensing 9729 7000kg non ibr boiler with imported burner fired used in paper mill

Last year, a paper mill based in Australia contracted a 6 ton oil gas condensing boiler which model is WNS6-1.25-Y.Q. Our company is responsible for all production work of this 6 ton/hr gas condensing steam boiler. The product utilizes condensation technology to effectively reduce the exhaust gas temperature and improve boiler efficiency. Moreover, the boiler adopts a number of advanced technologies to reduce the emission of harmful substances such as SOx, NOx and COx, and is an efficient and environmentally friendly solution for industrial boilers.

Problems coal 9729 7000kg non ibr boiler with imported burner fired gas boiler gas coal problems are: 1, more coal ash, 2, unevenness of coal particles, 3, coal contains a large amount of impurities, 4, a lower heating value of coal, 5 when combustion is not easy to ignite fire, 6, coal moisture content uncertain. 7, does not burn coal, slag high carbon content. In general, use is preferably designed coal boiler design coal or coal close, in order to ensure stable combustion. In recent years due to the growing tension surrounding the coal supply, coal supply has become diversified, coal quality is very different than before coal, have a great impact on the stability of the boiler combustion and normal heating operation. Impact of coal combustion boiler stable for: calorific value of coal is coal reflects an important indicator of good or bad, when the low calorific value of coal to a certain value, will not only affect the incomplete combustion instability and can lead boiler flameout, the outlet temperature of the boiler is difficult to compliance, affecting the normal operation. Volatile combustion and can be deposited at lower temperatures, as the combustion heat, the temperature rapidly increased coke particles, provide an extremely favorable conditions for ignition and combustion, volatiles further increased coke deposition and internal voids and the external reaction area, will help improve the speed of burning coke. Thus, the greater the content of volatile, nonflammable, the less fixed carbon in the coal component, the easier coal burning ember, devolatilization of many voids, increases the surface area of ​​the reaction, the combustion reaction is accelerated. When the volatile content is reduced, pulverized coal ignition temperature significantly increased, the hot increases, difficult fire, ignition time required becomes longer, the combustion stability is reduced, shifting the center of the flame, furnace absorbed radiation heating surface reduce heat, increase the heat absorption of the convection heating surface, the rear exhaust temperature, exhaust loss increases.