gas fired hot water boiler manufacturer in gwalior

1) checking and cleaning table tube pressure gauge, distilled water reset.

2) maintenance level electrodes, after extraction, polished with fine sandpaper.

3) to clean the flue, generally based on the exhaust gas temperature to determine the need to clean up. In general, the exhaust gas temperature does not exceed 350 deg.] C (at the outlet of the boiler, measured at the inlet flue), represents too increased fouling, reduced boiler efficiency, must be eliminated. On the one hand the purpose is to clean up the flue economic considerations, on the other hand also out of consideration (soot poor thermal conductivity, partial burn-prone) on security. When cleaning up asbestos gasket replacement, to use the wrong method mouth lap (anti-smoke ran out), graphite coating, can not add oil.

4) After the inspection or repair of the boiler, to check the manhole, the first hole, the nut can not be loosened hand hole, to check motor direction (from the fan end, the counterclockwise rotation).

Walking in the village, we can see that the sparse crowd, in front of the elderly chat and play with the children. Economic tide makes the village more than half of young workers out of the countryside towards the city diverse work environment also means that the child grows missing parental care. Walk to campus, low school buildings, overcrowded classrooms, lack of basic education all reflect the hardware of the mountains. The onset of winter, the mountains to cool the most obvious. The children in the hands of the cold and muddy drinking water, people can not help but feel bad. These difficulties and shortcomings, becoming fast boiler barbs lie in the hearts of all the staff, long linger in the mind.

3, fired hot water boiler manufacturer in gwalior fuel

As the name suggests, fuel oil hot water boiler is fuel, including diesel fuel, motor oil, kerosene and other types of fuel. In many areas, higher electricity prices, natural gas is more troublesome, oil is a good choice.

How to improve the energy efficiency of industrial boilers, industrial boilers how to improve energy efficiency 1, focusing on the transformation of practicality (1) above to recover waste heat can be effectively used. For example: high temperature organic heat boiler flue gas, but the process does not require the production of steam and hot water, attention should be considered heated by flue gas waste heat recovery techniques combustion air. (2) improved gas boiler should focus on energy-saving technologies improve the automation level of combustion control, precise control of the combustion state. (3) Consider first the application of energy-saving technologies and sophisticated equipment. 2, considering the technical nature to further improve the thermal efficiency of industrial boilers, it is necessary to consider new energy-saving technologies and equipment. Advanced (1) energy conservation technology and equipment, difficult to implement. Such as: waste heat recovery heat exchanger and the new technology: heat pipe technology, the condensed waste heat recovery technology; new water treatment device: microbial fouling and electromagnetic processing techniques (e.g., hydraulics); combustion automatic control technology. (2) spraying pulverized coal combustion technology (stratified combustion mode and suspension-fired boilers) design, construction and operation of high demand management, oxyfuel technology, such as high temperature air combustion technologies require large investments. 3, forming a complete transformation handle (1) must be considered boiler energy saving, heat insulation of synchronization is complete, sealing, and improved methods of burning fuel adjustment, and the fuel air distribution system of the inverter, reduced nicotinamide tube improved resistance to treatment. (2) pay attention to clean the boiler heating surface, and providing technical improvements boiler water, slag, ash, etc., to ensure that the boiler has good heat transfer properties. (3) the necessary training for technical operations and daily management of energy-saving equipment.