1t Natural Gas boiler Best Selling Thailand

After installation and commissioning fast Boiler professional and technical personnel, two hot water 1t boiler best selling thailands to provide our bodies quickly into the orbit of the normal operation. Meanwhile, the design of energy-saving equipment also effectively improve the thermal efficiency of the boiler, saved us a huge amount of fuel costs. --customer feedback

Biomass fired 1t boiler best selling thailand fuel characteristics

Biomass fuel has the following main characteristics compared to coal:

1. Low sulfur content. Biomass fuels are mostly less than 0.2% sulphur, and there is no need to install a gas desulfurization device when burning, which reduces costs and is environmentally friendly.

2. Most of the carbon in the biomass fuel combines with hydrogen to form a low-molecular hydrocarbon. After a certain temperature, it thermally decomposes and folds out the volatiles. Therefore, biomass fuel is easily ignited,

3. The density is small. The density of biomass fuel is obviously lower than that of coal, and the texture is relatively loose, especially crop straw, which is bulky.

4. Less carbon. The highest carbon content in biomass fuels is only about 50%, which is equivalent to the carbon content of lignite with less generation.

5. Straw biomass contains a large amount of alkali metal elements (mainly potassium and sodium). In the combustion process of biomass, the main performance is that the adhesion of ash is strong, and slagging and clogging are likely to occur in the furnace. Ash accumulates on the heated surface of the tail.

How to prevent corrosion of the gas 1t boiler best selling thailand gas boiler it if the temperature is too high, some of the components of the boiler working long hours in the intense heat of the environment at work, the situation will cause boiler corrosion occurs. So, we are in the process of work what to do to reduce the corrosion of it? Here to tell you about some of the methods of preventing corrosion of boiler gas. Reason and approach demands on internal corrosion of the gas boiler must be in accordance with the methods and principles of conduct, you can now use a more extensive domestic and international gas boiler corrosion detection approach is magnetic flux leakage and ultrasonic detection. Ultrasonic Ultrasonic detection is used to measure the wall thickness after etching using the principle of ultrasonic pulse reflection. The basic principle of magnetic flux leakage method leakage flux detection method is based on the high-permeability properties of the ferromagnetic materials, magnetic permeability of the gas boiler corrosion disadvantage is much less than the permeability of the furnace, the applied gas boiler is magnetized in a magnetic field effect, when the furnace is no disadvantage, most of the magnetic lines of force through the pipe. Uniform distribution of lines of magnetic force at the moment; when the internal elbow has the disadvantage that the onset of meander lines of magnetic force, and a part of magnetic lines of force from leaking out of the outer steel pipe. Detecting the escaping magnetic flux leakage outer elbow, it can be determined whether the shortcomings exist. When the probe detects a straight guide hot oil furnace inner wall emit ultrasound pulse, to receive from the probe first reflected pulse within the outer wall, and will receive the ultrasound probe, this pulse and the pulse reflected from the outer wall of the outer appearance of the reflected pulse trip distance between the reflecting wall thickness. Gas-fired boiler in accordance with the practices and conditions set forth in the demand for the detection of practice, in accordance with the detection of ultrasonic inspection method can be distinguished way. High temperature components such as a gas boiler front panel, convection superheater and reheater temperature is the primary structural member and the like inside the boiler, a very long time to work in the harsh environment of use of the medium flame, smoke, ash, etc., and therefore the working process changes occurred in the organization and function of a range of materials, these changes hit the gas boiler creep, fatigue, corrosion, erosion and other messy aging and failure mechanisms. These high temperatures Microstructure component material will follow the extension of working time deteriorated creep damage occurs, such as loose pearlite, spheroidized carbides, grain boundary and growth mobilization, holes creep, intergranular cracking occurs .

In fact, the 1t boiler best selling thailand "coal to gas" fully able to achieve energy, mainly reflected in:

1, high combustion efficiency