oil gas gypsum frying boiler

The wns oil and gas oil gypsum frying boiler fuel we designed generally uses natural gas, light oil, heavy oil, coke oven gas, biogas, and the like. As such, it is convenient when using fuel, and the fuel can be delivered by piping. This boiler uses a fully automatic low nitrogen burner and flue gas recirculation system (FGR) system to achieve ultra low nitrogen emissions.

2.4MW YQW gas-fired thermal oil heater for textile industryThermal oil heaters play an important role in the textile industry, providing heat energy for the process of dyeing, drying and printing. Located in Manila (the capital of the Philippines), Pantone Finishing Corporation is a large company engaged in textile products. The rising in natural gas price results in the increases of running cost for original thermal oil heaters. In order to save cost while having no effect on production, the company planned to purchase several energy-saving thermal oil heaters. The thermal oil heater produced by ZOZEN has superior  advantages in manufacturing technique, which will guarantee the high quality. In consideration of the actual condition, ZOZEN’s engineer provided the company with YQW series gas-fired thermal oil heater and a tailored-made solution. The thermal oil heater adopts multi-loop coil tube design for safe operation, sufficient heating surface and high thermal efficiency. Furthermore,  to achieve maximum effect of energy saving and consumption reduction, the thermal oil heaters are also equipped with waste heat recovery device including heat recovery oil gypsum frying boiler, air pre-heater and economizer. The textile mill was so satisfied with the solution that they ordered several thermal oil heaters.

Recently, Shaanxi Province, to build a good ecological environment, issued a "Blue Sky Battle Shaanxi Province 2019 work program", "clear water Battle of Shaanxi Province 2019 work program", "Shaanxi Province Pure Land Battle 2019 work program", "Shaanxi Castle battle province 2019 work program "and other four major environmental battle to defend the program. Details below.

"Program" is mentioned: this year by optimizing the six policies, tough fight seven games, seven strengthen security measures, the average concentration in urban areas and strive to fine particulate matter (PM2.5) fell 4 percent to ensure that the number of heavy pollution days significantly reduce atmospheric environmental quality improved significantly, people's happiness significantly enhanced blue sky.

3, increase economic policy support to accelerate clean winter heating work, in accordance with the principle of "Jiangyoufalie", the establishment of special funds for air pollution prevention and control arrangements with local ambient air quality to improve performance linkage mechanism.

1, lay the tough restructuring, according to the law closed down quit a number of energy consumption, environmental protection, safety, technology and production of non-compliance or substandard products out of production capacity, before the end of the year, the Guanzhong area basically completed "messy dirty" industrial enterprises and in accordance with regulations cluster comprehensive treatment.

2, tough fight industrial pollution control, focusing on gas-related industrial pollution sources to perform all the installation of flue gas emission standards new online monitoring facilities, the Guanzhong area cement, coke, iron and steel, nonferrous metals, glass, ceramics, tile and other industries, and to ban coal-fired hot air furnace, the coal-fired cogeneration substantially eliminated heating pipe network coverage heating, drying furnace (kiln).

4, clean energy alternatives tough fight, central heating station complete transformation of existing coal-fired clean off the area before the end of the city to clean the heating rate in urban areas off more than 90% before the end of May to complete the Guanzhong area rural village set loose coal governance indeed household inventory; motor vehicle pollution control tough fight, and increase freight railway construction investment, strengthen the construction of urban public transport system, promote high-emission motor vehicle pollution control, Guanzhong area cities and built-up area buses in the proportion of new energy vehicles to achieve 80 %, starting July 1, the province's implementation of six national emissions standards.

"Program" also pointed out that by strengthening the organizational leadership, strengthen environmental law enforcement, special inspectors carry out inspections of air pollution, strengthen grid environment supervision, improve environmental monitoring and control network, strengthen science and technology infrastructure support, strict accountability assessment 7 safeguards to ensure that work effectively.

6 tons adjusting a combustion gas steam oil gypsum frying boiler, normal combustion boiler three basic aspects of indicators include a uniform supply of the fuel, reasonable ventilation, adjustment the combustion. 1, to maintain the high temperature of the combustion chamber temperature of the upper layer is preferably in the 1100 ~ 1300 ℃, flame orange in color. Flame reddish color indicates that the amount is not enough to the wind, the color white indicates that excessive wind. It should be appropriately adjusted. 2, fuel ash to reduce ash content in the combustibles to be below 10%. 3, reducing the temperature of the boiler flue gas exhaust gas temperature should be controlled below 200 ℃. 4, holding furnace negative excess air boiler is 1.2 to 1.4, by adjusting the balance of the blowers to maintain the furnace pressure is -20 ~ -30Pa. 5, the thermal efficiency of the boiler to improve the thermal efficiency of the boiler should be kept above 60%. II. Combustion Adjustment 1, the amount of fuel to air required for combustion and the amount of a reasonable distribution. Ventilation should first increase the amount of fuel increases, it should first reduce the amount of fuel supply reduced ventilation. 2, the thickness of the seam and seam thickness configuration grate speed is 80 ~ 120mm grate speed at high, middle and low profile configuration of several commonly used methods:. 9a rapid combustion of thin seam b c thick seam in low combustion. 3 thick seam combustion speed, the segment with the wind blowing principle: burn promoting intermediate ends. That is, after the coal into the coal starts to warm up the shutter, fire line front arch, the primary combustion zone, the middle grate to burn the rear grate zone. Normal combustion conditions are: fuel from the coal at the beginning of the fire shutter 300mm, uniform flames, the fire bed formation, at the end of combustion from the end of the grate 300 ~ 500mm. 4. maintain proper furnace temperature to avoid coking. The fire bed to maintain the homogeneous combustion, to avoid burning fire bed obliquely. 6. The residence time of the fuel on the grate in less than 30 minutes.